IPS 10.1 inch TFT LCD, 10.1 IPS Display with Touch sreen, MIPI DSI interface - RFH1010J-AYH-MNB
IPS 10.1 inch TFT LCD, 10.1 IPS Display with Touch sreen, MIPI DSI interface - RFH1010J-AYH-MNB

High Brightness 10.1 inch 1024x600 IPS TFT LCD with Touchscreen, MIPI

Model No. RFH1010J-AYH-MNB

RFH1010J-AYH-MNB is a 10.1-inch, projected capacitive touch screen IPS TFT Display and 16:9 aspect ratio. Its resolution is 1024x600 pixels. The module features wide viewing angle (85/85/85/85 degree) thanks to the IPS panel which is one of the most popular techniques on the market now.

This 10.1 inch IPS Display has driver IC EK79007AD3 + EK73217BCGA supporting 4-lanes MIPI interface. It has high brightness, with a brightness of 900 cd/㎡ and contrast ratio (typical value) of 800:1. The module works within the temperature -20 to+70℃, storage temperature covers from-30 to+80℃.

Related products no.:
RFH1010J-AYH-MNN: Without Touch Screen
RFH1010J-AYH-MNB: With Projected Capacitive Touch Screen
RFH1010J-AYH-MNS: With Resistive Touch Screen

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
TFT Series High Brightness TFT, IPS TFT LCD
Size (Diagonal) 10.1 inch
Dot Matrix / Resolution 1024 × RGB × 600 dots
Module Dimension 235(W) × 143(H) × 8.78(D) mm
Active Area 222.72 × 125.28 mm
Dot / Pixel Pitch 0.2175 × 0.2088 mm
LCD Type TFT, Normally Black, Transmissive
Viewing Angle 85/85/85/85 (IPS)
Aspect Ratio 16:9
Backlight Type LED, Normally White
Control Board No
TFT Driver IC EK79007AD3 + EK73217BCGA or equivalent
Interface 4-Lanes MIPI
PCAP FW Version V6.0.0.0.62.90.1.2
PCAP IC ILI2511 or equivalent
PCAP Interface USB (I2C available)
Detect Points 5 Points
Touch Panel Projected Capacitive Touchscreen, PCAP
Surface Glare
Brightness 900 cd/㎡
Mounting Hole No
Operating mode No
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C

TFT LCD Module

Pin No. Symbol Description
1 VLED+ LED Anode
2 VLED+ LED Anode
3 VGH Positive power for TFT
4 VGL Negative power for TFT
5 UPDN Gate up or down scan control.
UPDN = ”L”, STV2 output vertical start pulse and UD pin output logical “L” to Gate driver. (default)
UPDN = ”H”, STV1 output vertical start pulse and UD pin output logical “H” to Gate driver
6 SHLR Source right or left sequence control.
SHLR = ”L“, shift left: last data = S1←S2←S3….......←S1536 = first data.
SHLR = ”H“, shift right: first data = S1→S2→S3….....→S1536 = last data.(default)
7 VLED- LED Cathode
8 VLED- LED Cathode
9 AVDD Analog power
10 GND Digital ground
11 D3P MIPI data input.
12 D3N MIPI data input.
13 GND Digital ground
14 D2P MIPI data input.
15 D2N MIPI data input.
16 GND Digital ground
17 CLKP MIPI clock input
18 CLKN MIPI clock input
19 GND Digital ground
20 D1P MIPI data input.
21 D1N MIPI data input.
22 GND Digital ground
23 D0P MIPI data input.
24 D0N MIPI data input.
25 GND Digital ground
26 STBYB Standby mode.
STBYB = ”H“,normal operation(default)
STBYB = ”L”, timing controller, source driver will turn off, all output are GND.
27 RESET Global reset pin. Active Low to enter Reset State. Normally pull high. Connecting with an RC reset circuit for stability.
28 VDD (1.8V) Digital power
29 VDD (1.8V) Digital power
30 VCOMI Common voltage

 

PCAP PIN Definition

Pin Symbol Function
1 USB_VSS System ground
2 USB_VDD 5V Power supply
3 USB_D+ Data +
4 USB_D- Data -
5 VSS System ground
6 SDA I2C data input and output
7 SCL I2C clock input
8 RST External Reset, Low is active
9 INT External interrupt to the host
10 VDDT 3.3 Power supply

IPS 10.1 inch TFT LCD, 10.1 IPS Display with Touch sreen, MIPI DSI interface - RFH1010J-AYH-MNB

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

Typical Operation Conditions (At Ta = 25 °C,)

Item Symbol Min. Typ. Max. Unit
Digital Power Supply Voltage For LCD VDD 1.71 1.8 1.89 V
Analog Power Supply Voltage AVDD 9.89 10.2 10.5 V
Gate On Power Supply Voltage VGH 19.4 20.0 20.6 V
Gate Off Power Supply Voltage VGL -10.3 -10.0 -9.7 V
Common Power Supply Voltage VCOMI 4.0 4.3 4.6 V
Supply PCAP VDDT 3.0 3.3 3.6 V
IVDDT   90.5 115 mA
USB_VDD 5V 4.4 5.0 5.5 V
I VDD 5V — 97.8 120 mA

Related Products

Top