1280x800 Touch Screen, 1280x800 Capacitive Touch Screen TFT 10.1 - RFK1010L-AYH-LNG

10.1" 1280x800 Capacitive Touch Screen IPS TFT Display

Model No. RFK1010L-AYH-LNG

RFK1010L-AYH-LNG is a 10.1-inch 1280x800 Touch Screen TFT Display and the aspect ratio is 16:10. This 1280x800 touch screen TFT display module has driver IC EK79202B1 supporting LVDS Interface (Low Voltage Differential Signaling). The module features wide viewing angle thanks to the IPS panel which is one of the most popular techniques on the market now, and viewing angle 80/80/80/80 degree.

It has high brightness, with a brightness of 900 cd/㎡ and contrast ratio (typical value) of 1000:1. The module also comes with capacitive touch screen with IC GT928 supporting I2C interface and 10-point touch. This module is suitable for outdoor applications.

The power supply voltage ranges from 3.0~3.5V, typical value is 3.3V. The module works within the temperature -20 to +70℃, storage temperature covers from-30 to +80℃.

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
TFT Series High Brightness TFT LCD, IPS TFT LCD, LVDS TFT LCD Display
Size (Diagonal) 10.1 inch
Dot Matrix / Resolution 1280 × 3(RGB) × 800 dots
Module Dimension 257.96 × 168.6 × 9.48 mm
Active Area 216.96(H) × 135.6(V) mm
Dot / Pixel Pitch 0.1695 × 0.1695 mm
Display Mode Normally Black
Viewing Angle 80/80/80/80
Pixel Arrangement
(Pixel Configuration)
R.G.B. Vertical Stripe
Aspect Ratio 16:10
Backlight Type LED, Normally White
Control Board No
TFT Driver IC EK79202B1
Interface LVDS
PCAP FW Version 80
PCAP IC GT928 or Equivalent
PCAP Interface I2C
PCAP Resolution 1280*800
Detect Points 10 Points
Touch Panel Projected Capacitive Touch Screen, PCAP
Surface Glare
Brightness 900 cd/㎡
Mounting Hole No
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C

Interface Connector

Pin No. Symbol I/O Function
1 NC - No connection
2 VCC P Power Supply
3 VCC P Power Supply
4 NC - No connection
5 NC - No connection
6 NC - No connection
7 GND P Ground
8 Rxin0- I -LVDS Differential Data Input
9 Rxin0+ I +LVDS Differential Data Input
10 GND P Ground
11 Rxin1- I -LVDS Differential Data Input
12 Rxin1+ I +LVDS Differential Data Input
13 GND P Ground
14 Rxin2- I -LVDS Differential Data Input
15 Rxin2+ I +LVDS Differential Data Input
16 GND P Ground
17 RxCLK- I -LVDS Differential Clock Input
18 RxCLK+ I +LVDS Differential Clock Input
19 GND P Ground
20 Rxin3- I -LVDS Differential Data Input
21 Rxin3+ I +LVDS Differential Data Input
22 GND P Ground
23 NC - No connection
24 NC - No connection
25 GND P Ground
26 NC - No connection
27 NC - No connection
28 NC - No connection
29 NC - No connection
30 GND P Ground
31 NC - No connection
32 NC - No connection
33 NC - No connection
34 NC - No connection
35 VGL P Gate OFF Voltage
36 NC - No connection
37 NC - No connection
38 VGH P Gate ON Voltage
39 NC - No connection
40 NC - No connection

I: input, O: output, P: Power

PCAP PIN Definition

Pin Symbol Function
1 SDA I2C data input and output
2 SCL I2C clock input
3 RST External Reset, Low is active
4 INT External interrupt to the host
5 VDDT Power Supply : +3.3V
6 VSS Ground for analog circuit

Backlight Driving Part

Pin No. Symbol Function
1 LED+ Red, LED_ Anode
2 LED- Black, LED_ Cathode

 

1280x800 Touch Screen, 1280x800 Capacitive Touch Screen TFT 10.1 - RFK1010L-AYH-LNG

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Typical Operation Conditions

Item Symbol Values Unit
Min. Typ. Max.
Power voltage VCC 3.0 3.3 3.5 V
VGH 17.5 18 18.5 V
VGL -11.5 -10.5 -10.0 V
VSP  - 5.5  - V
VSN  - -5.5  - V
Supply Voltage For Touch Logic VDDT 2.8 3.3 V
Top