10.1 inch LVDS TFT LCD Panel - RFH101ZA-ACW-LNN
10.1 inch LVDS TFT LCD Panel - RFH101ZA-ACW-LNN
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size 10.1 inch
Dot Matrix (Resolution) 1024 × RGB × 600 dots
Module Dimension 235(W) × 143(H) × 3.0(D) mm
View Area 226(H) × 128.5(V) mm
Active Area 222.72(H) × 125.28(V) mm
Dot Pitch 0.2175(W) × 0.2088(H) mm
LCD Type TFT, Normally White, Transmissive
View Direction 12 o’clock
Gray Scale Inversion Direction 6 o’clock
Backlight Type LED, Normally White
Control-Board No
Bulit-in Controller No
Interface LVDS
Touch Panel Without Touch Panel
Surface Anti-Glare
Brightness 160 cd/㎡
Frame Through Hole No
Operating Temperature -10~60 °C
Storage Temperature -20~70 °C
TFT Series Standard TFT LCD
PinNo.  Symbol  Description 
1 VCOM  Common voltage 
2 VDD  Digital power 
3 VDD  Digital power 
4 NC  Not connect 
5 RESET  Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ,C=1μF) 
6 STBYB  Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z 
7 GND  Digital ground 
8 NIND0  Negative LVDS differential data inputs 
9 PIND0  Positive LVDS differential data inputs 
10 GND  Digital ground 
11 NIND1  Negative LVDS differential data inputs 
12 PIND1  Positive LVDS differential data inputs 
13 GND  Digital ground 
14 NIND2  Negative LVDS differential data inputs 
15 PIND2  Positive LVDS differential data inputs 
16 GND  Digital ground 
17 NINC  Negative LVDS differential clock inputs 
18 PINC  Positive LVDS differential clock inputs 
19 GND  Digital ground 
20 NIND3  Negative LVDS differential data inputs 
21 PIND3  Positive LVDS differential data inputs 
22 GND  Digital ground 
23 NC  Not connect 
24 NC  Not connect 
25 GND  Digital ground 
26 NC  Not connect 
27 NC  Not connect 
28 SELB  6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit 
29 AVDD  Analog power 
30 GND  Digital ground 
31 VLED- LED Cathode 
32 VLED- LED Cathode 
33 SHLR  Left or right display control 
34 UPDN  Up / down display control 
35 VGL  Negative power for TFT 
36 NC  Not connect 
37 NC  Not connect 
38 VGH  Positive power for TFT 
39 VLED+  LED Anode 
40 VLED+  LED Anode 

10.1 inch LVDS TFT LCD Panel - RFH101ZA-ACW-LNN

Item Symbol Min Typ Max Unit
Operating Temperature TOP -10 60
Storage Temperature TST -20 70

Typical Operation Conditions

Item Symbol Min Typ Max Unit
Digital Power Supply Voltage For LCD VDD 3 3.3 3.6 V
Analog Power Supply Voltage AVDD - 10.4 11 V
Gate On Power Supply Voltage VGH 20 21 22 V
Gate Off Power Supply Voltage VGL -8.5 -8 -7 V
Common Power Supply Voltage VCOM - 3.8 - V
Logic Input Voltage VIH 0.7*DVDD - DVDD V
VIL GND - 0.3*DVDD V

 

Backlight Driving Conditions

Parameter Symbol Min Typ Max Unit
Supply voltage of white LED backlight VL 8.4 9.6 10.8 V
Current for LED backlight IL 135 140 150 mA
Uniformity 70 75 - %
LED life time - 20,000 - - Hr
Top