IPS, LVDS Capacitive Touch Screen Display 10.1- RFK1010F-AYH-LNG

IPS, LVDS Capacitive Touch Screen TFT Display 10.1"

Model No. RFK1010F-AYH-LNG

RFK1010F-AYH-LNG is a 10.1-inch IPS TFT LCD module with projected capacitive touch panel. It features high brightness and wide viewing angle. This module supports LVDS Interface (Low Voltage Differential Signaling). The contrast ratio of the module is 800:1 (typical value), the brightness is 900 nits (typical value), and the aspect ratio is 16:9. The PCAP touchscreen has a built-in IC GT928 which enables 5-points touch, supports I2C interface.

Inquiry or Demo Code Datasheet Back Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size (Diagonal) 10.1 inch
Dot Matrix / Resolution 1280 × 3(RGB) × 800 dots
Module Dimension 257.96 × 168.6 × 9.48 mm
View Area 218 × 137 mm
Active Area 216.96(H) × 135.6(V) mm
Dot / Pixel Pitch 0.1695 × 0.1695 mm
Display Mode Normally Black
View Direction IPS
Pixel Arrangement
(Pixel Configuration)
R.G.B. Vertical Stripe
Aspect Ratio 16:9
Backlight Type LED, Normally White
Control-Board No
Interface LVDS
PCAP FW Version 0X50
PCAP IC GT928 or Equivalent
PCAP Interface I2C
Detect Points 5 Points
Touch Panel Projected Capacitive Touch Screen, PCAP
Surface Glare
Brightness 900 cd/㎡
Frame Through Hole No
Operating Temperature -20~+70 °C
Storage Temperature -20~+70 °C
TFT Series High Brightness TFT LCD, IPS TFT LCD, LVDS TFT LCD Display

Interface Connector
A 40pin connector is used for the module electronics interface. The recommended model is F62240-H1210B manufactured by Vigorconn.

Pin No. Symbol I/O Function
1 VCOM P Common Voltage
2 VDD P Power Supply
3 VDD P Power Supply
4 NC - No connection
5 NC - No connection
6 NC - No connection
7 GND P Ground
8 Rxin0- I -LVDS Differential Data Input
9 Rxin0+ I +LVDS Differential Data Input
10 GND P Ground
11 Rxin1- I -LVDS Differential Data Input
12 Rxin1+ I +LVDS Differential Data Input
13 GND P Ground
14 Rxin2- I -LVDS Differential Data Input
15 Rxin2+ I +LVDS Differential Data Input
16 GND P Ground
17 RxCLK- I -LVDS Differential Clock Input
18 RxCLK+ I +LVDS Differential Clock Input
19 GND P Ground
20 Rxin3- I -LVDS Differential Data Input
21 Rxin3+ I +LVDS Differential Data Input
22 GND P Ground
23 NC - No connection
24 NC - No connection
25 GND P Ground
26 NC - No connection
27 NC - No connection
28 NC - No connection
29 AVDD P No connection
30 GND P Ground
31 NC - No connection
32 NC - No connection
33 NC - No connection
34 NC - No connection
35 VGL P Gate OFF Voltage
36 NC - No connection
37 NC - No connection
38 VGH P Gate ON Voltage
39 NC - No connection
40 NC - No connection

I: input, O: output, P: Power

PCAP PIN Definition

Pin Symbol Function
1 SDA I2C data input and output
2 SCL I2C clock input
3 RST External Reset, Low is active
4 INT External interrupt to the host
5 VDDT Power Supply : +3.3V
6 GND Ground for analog circuit

Sun Readable, IPS, LVDS Capacitive Touch Screen Display 10.1- RFK1010F-AYH-LNG

Sun Readable, IPS, LVDS Capacitive Touch Screen Display 10.1- RFK1010F-AYH-LNG

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -20 +70

Typical Operation Conditions

Item Symbol Values Unit
Min. Typ. Max.
Power voltage VDD 2.3 2.5 2.7 V
AVDD 8.0 8.2 8.4 V
VGH 21.7 22 22.3 V
VGL -7.3 -7 -6.7 V
Input signal voltage VCOM 2.7 3.0 3.3 V
Supply Voltage For Touch Logic VDDT 2.8 3.3 V

Current Consumption

Item Symbol Values Unit
Min. Typ. Max.
Current for Driver IGH 300 705 1000 uA
IGL 300 705 1000 uA
IVDD 50 95 120 mA
IAVDD 8 45 70 mA
Top