RFK1010L-BYH-LNG

10.1 inch PCAP Touch TFT Display with Power Board

Model No. RFK1010L-BYH-LNG

RFK1010K-BYW-LNG is a 10.1-inch active matrix color TFT-LCD with a power board. Its IPS panel can present HD graphics with a resolution of 1280 x 3(RGB) x 800 pixels. The module dimension is 257.96 × 168.6 × 25.88, and its active area is 216.96×135.6 mm. The display mode of this module is usually black and transmissive with a high-light white LED backlight.

RFK1010K-BYW-LNG has an LVDS interface and a capacitive touch panel. Its driver IC is EK79202B1. For the customer's convenience, the display comes with a power board supporting only 12V DC voltage. It features a high contrast ratio (typical value) of 1000: 1 and a high brightness of 900 cd/m2. It is ideal for various applications, such as automotive displays, multimedia screens, etc.

Inquiry or Demo Code

Datasheet

Back

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
TFT Series	High Brightness TFT LCD, IPS TFT LCD, LVDS TFT LCD Display, TFT Panel with Power Board
Size (Diagonal)	10.1	inch
Dot Matrix / Resolution	1280 × 3(RGB) × 800	dots
Module Dimension	257.96 × 168.6 × 25.88	mm
Active Area	216.96(H) × 135.6(V)	mm
Dot / Pixel Pitch	0.1695 × 0.1695	mm
Display Mode	Normally Black , Transmissive
View Direction	80/80/80/80 (IPS)
Pixel Arrangement (Pixel Configuration)	R.G.B. Vertical Stripe
Aspect Ratio	16:10
Backlight Type	LED, Normally White
Control Board	No
Power Board	Yes
TFT Driver IC	EK79202B1
Interface	LVDS
PCAP FW Version	80
PCAP IC	GT928 or Equivalent
PCAP Interface	I2C
PCAP Resolution	1280*800
Detect Points	5	Points
Touch Panel	Projected Capacitive Touch Screen, PCAP
Surface	Glare
Brightness	900	cd/㎡
Mounting Hole	No
Operating Temperature	-20~+70	°C
Storage Temperature	-30~+80	°C

LCM PIN Definition

Pin No.	Symbol	I/O	Function
1	DC12V	P	Power Supply
2	DC12V	P	Power Supply
3	DC12V	P	Power Supply
4	NC	-	No connection
5	GND	P	Ground
6	GND	P	Ground
7	GND	P	Ground
8	Rxin0-	I	-LVDS Differential Data Input
9	Rxin0+	I	+LVDS Differential Data Input
10	GND	P	Ground
11	Rxin1-	I	-LVDS Differential Data Input
12	Rxin1+	I	+LVDS Differential Data Input
13	GND	P	Ground
14	Rxin2-	I	-LVDS Differential Data Input
15	Rxin2+	I	+LVDS Differential Data Input
16	GND	P	Ground
17	RxCLK-	I	-LVDS Differential Clock Input
18	RxCLK+	I	+LVDS Differential Clock Input
19	GND	P	Ground
20	Rxin3-	I	-LVDS Differential Data Input
21	Rxin3+	I	+LVDS Differential Data Input
22	GND	P	Ground
23	PWM		This pin is connected to the external LED driver. PWM type control signal for brightness of the LED backlight. If not used, please float this pin.
24	NC	-	No connection
25	DC3V	P	Power Supply
26	NC	-	No connection
27	GND	P	Ground
28	SDA	I/O	Serial communication data input.
29	SCL	I	Serial communication clock input
30	INT	O	External interrupt to the host
31	RST	I	External Reset, Low is active
32	GND	P	Ground
33~43	NC	-	No connection
44	GND	P	Ground
45	GND	P	Ground
46	GND	P	Ground
47	NC	-	No connection
48	DC12V	P	Power Supply
49	DC12V	P	Power Supply
50	DC12V	P	Power Supply

I: input, O: output, P: Power

10.1 inch PCAP Touch TFT Display with Power Board - RFK1010L-BYH-LNG

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Typical Operation Conditions

Item	Symbol	Min	Typ	Max	Unit
Supply Voltage For LCM +12V	DC12V	－	12.0	－	V
Supply Current For LCM +12V	IDC12V	－	620	950	mA
Supply Voltage For CTP(I2C)	DC3V	3.15	3.3	3.45	V
Supply Current For CTP(I2C)	IDC3V	—	14	21	mA