10.4 inch 1024x768 IPS LVDS TFT Display Module with Capacitive Touch Screen, RFM1040G-AWW-LNB
10.4 inch 1024x768 IPS LVDS TFT Display Module with Capacitive Touch Screen, RFM1040G-AWW-LNB

10.4" 1024x768 IPS LVDS TFT Display Module with Capacitive Touch Screen

Model No. RFM1040G-AWW-LNB

RFM1040G-AWW-LNB is a 10.4-inch, IPS TFT LCD module with projected capacitive touch screen. The resolution is 1024x768 pixels and the aspect ratio is 4:3. This TFT display module supports LVDS Interface (Low Voltage Differential Signaling). The module adopts IC ILI2511 for PCAP touch supporting USB interface and 2-points touch.

This is a wide temperature TFT display module features wide viewing angle (80/80/80/80) thanks to the IPS panel which is one of the most popular techniques on the market now. It features high contrast, providing contrast ratio (typical value) 1,000: 1 with brightness 400 cd/m2. LCM voltage ranges from 3V-3.6V ; typical value is 3.3V. The module works within wide temperature range from-30 to +80℃,Storage Temperature covers from-30 to +80℃.

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
TFT Series LVDS TFT Display, IPS TFT LCD, Wide View TFT, Wide Temperature TFT
Size (Diagonal) 10.4 inch
Dot Matrix / Resolution 1024 × RGB × 768 (TFT) dots
Module Dimension 240.6 × 190.8 × 15.65 mm
Active Area 210.432 × 157.824 mm
Dot / Pixel Pitch 0.2055 × 0.2055 mm
LCD Type TFT, Normally Black, Transmissive
Viewing Angle 80/80/80/80 min
Aspect Ratio 4:3
Backlight Type LED, Normally White
Control Board No
Interface LVDS
PCAP FW Version 6.0.0.0.0.0.0.3
PCAP IC ILI2511 or Equivalent
PCAP Interface USB
PCAP Resolution 16384*16384
Detect Points 2 Points
Touch Panel Projected Capacitive Touch Screen, PCAP
Surface Glare
Brightness 400 cd/㎡
Mounting Hole No
Operating Temperature -30~+80 °C
Storage Temperature -30~+80 °C

LCM PIN Definition (CON1)

Pin Symbol Function
1-2 VDD Power supply: + 3.3V
3-4 GND Ground
5 Link0- LVDS differential data input
6 Link0+ 0+ LVDS differential data input
7 GND Ground
8 Link1- LVDS differential data input
9 Link1+ 1+ LVDS differential data input
10 GND Ground
11 Link2- 2- LVDS differential data input
12 Link2+ 2+ LVDS differential data input
13 GND Ground
14 CLKIN- - LVDS differential clock input
15 CLKIN+ + LVDS differential clock input
16 GND Ground
17 Link3- 3- LVDS differential data input
18 Link3+ 3+ LVDS differential data input
19 MODE Bit 6:High(6 Bit);Low(8 Bit)
20 SC Scan direction selector (Low: Normal ;High: Reverse)

 

CON2

Pin Symbol Function
1-2 VLED 12V 12V input
3-4 GND Ground
5 BLEN Backlight ON-OFF
6 LED PWM Light Dimming Control (PWM) Input Voltage
(Low active)

 

CON3

Pin Symbol Function
1-3 NC No connection
4 Vss Power ground.
5-8 NC No connection
9 RESET RST
10 USB_D- D-
11 USB_D+ D+
12 USB_VDD 5V Power supply

10.4 inch 1024x768 IPS LVDS TFT Display Module with Capacitive Touch Screen, RFM1040G-AWW-LNB

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80

Operating conditions

Item Symbol Standard Value Unit
Min Typ Max
Power voltage VDD 3.0 3.3 3.6 V
Supply PCAP USB_VDD 5V 4.4 5.0 5.5 V
I VDD 5V 95 145 mA
Input logic high voltage VIH 0.7 VDD - VDD V
Input logic low voltage VIL 0 - 0.3 VDD V
Current for Power IVDD - 385 424 mA
Top