10.1 inch IPS 1024x600 TFT LCD Supporting HDMI Connector - RFH101VJ-1YH-LHB

10.1" IPS 1024x600 TFT LCD Supporting HDMI Connector

Model No. RFH101VJ-1YH-LHB

RFH101VJ-1YH-LHB is a 10.1-inch, IPS TFT LCD display module and 16:9 aspect ratio. Its resolution is 1024×600 pixels, color active matrix TFT LCD display with IPS panel. IPS technique allows viewers to view the screen from wider angles (85/85/85/85 degree). This TFT display module uses EK79001HN and EK73215BCGA driver IC, supporting HDMI connector (only DVI signal). The PCAP touchscreen (USB interface) adopts IC ILI2511 which enables 1-point/2-point/multiple-point touch. The brightness is 850 cd/m2 with contrast ratio 800:1. LCM voltage ranges from 4.7V-5.5V, typical value is 5V. Operating temperature covers from -20~+70℃, storage temperature range is from -30~+80℃.

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
TFT Series Support HDMI Signal TFT LCD Display, IPS TFT LCD
Size (Diagonal) 10.1 inch
Dot Matrix / Resolution 1024 RGB × 600 dots
Module Dimension 235(W) × 143(H) × 27.96(MAX)(D) mm
Active Area 222.72 (H) × 125.28(V) mm
Dot / Pixel Pitch 0.2175(W) × 0.2088(H) mm
Display Mode Normally Black , Transmissive
Viewing Angle 85/85/85/85 (IPS)
Pixel Arrangement
(Pixel Configuration)		 RGB-STRIPE
Aspect Ratio 16:9
Backlight Type LED, Normally White
Control Board Yes
Built-in Controller TFP401
TFT Driver IC EK79001HN + EK73215BCGA or equivalent
Interface Support HDMI Connector (Only DVI Signal)
PCAP FW Version V6.0.0.0.62.90.1.2
PCAP IC ILI2511 or equivalent
PCAP Interface USB
Detect Points 1 / 2 / Option Points
Touch Panel Projected Capacitive Touchscreen, PCAP
Surface Glare
Brightness 850 cd/㎡
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C

1.CON6

Pin No. Symbol Function
1 NC No connection
2 5V Raspberry Pi:Power 5V
3 GPIO02 Raspberry Pi:GPIO02
4 5V Raspberry Pi:Power 5V
5 GPIO03 Raspberry Pi:GPIO03
6 GND Raspberry Pi:GND
7 GPIO04 Raspberry Pi:GPIO04
8 GPIO14 Raspberry Pi:GPIO14
9 GND Raspberry Pi:GND
10 GPIO15 Raspberry Pi:GPIO15
11 GPIO17 Raspberry Pi:GPIO17
12 BL-PWM
(GPIO18)		 Backlight Enable ,Active_L (Raspberry Pi:GPIO18)
13 GPIO27 Raspberry Pi:GPIO27
14 GND Raspberry Pi:GND
15 GPIO22 Raspberry Pi:GPIO22
16 GPIO23 Raspberry Pi:GPIO23
17 NC No connection
18 GPIO24 Raspberry Pi:GPIO24
19 GPIO10 Raspberry Pi:GPIO10
20 GND Raspberry Pi:GND
21 GPIO09 Raspberry Pi:GPIO09
22 GPIO25 Raspberry Pi:GPIO25
23 GPIO11 Raspberry Pi:GPIO11
24 GPIO08 Raspberry Pi:GPIO08
25 GND Raspberry Pi:GND
26 GPIO07 Raspberry Pi:GPIO07
27 ID_SD Raspberry Pi:ID_SD
28 ID_SC Raspberry Pi:ID_SC
29 GPIO05 Raspberry Pi:GPIO05
30 GND Raspberry Pi:GND
31 GPIO06 Raspberry Pi:GPIO06
32 GPIO12 Raspberry Pi:GPIO12
33 GPIO13 Raspberry Pi:GPIO13
34 GND Raspberry Pi:GND
35 GPIO19 Raspberry Pi:GPIO19
36 GPIO16 Raspberry Pi:GPIO16
37 GPIO26 Raspberry Pi:GPIO26
38 GPIO20 Raspberry Pi:GPIO20
39 GND Raspberry Pi:GND
40 GPIO21 Raspberry Pi:GPIO21

2.CON5

Pin No. Symbol Function
1 3.3V TFT Module Power limit can only output 3.3V,100mA
2 5V Raspberry Pi:Power 5V
3 GPIO02 Raspberry Pi:GPIO02
4 5V Raspberry Pi:Power 5V
5 GPIO03 Raspberry Pi:GPIO03
6 GND Raspberry Pi:GND
7 GPIO04 Raspberry Pi:GPIO04
8 GPIO14 Raspberry Pi:GPIO14
9 GND Raspberry Pi:GND
10 GPIO15 Raspberry Pi:GPIO15
11 GPIO17 Raspberry Pi:GPIO17
12 BL-PWM
(GPIO18)		 Backlight Enable ,Active_L (Raspberry Pi:GPIO18)
13 GPIO27 Raspberry Pi:GPIO27
14 GND Raspberry Pi:GND
15 GPIO22 Raspberry Pi:GPIO22
16 GPIO23 Raspberry Pi:GPIO23
17 3.3V TFT Module Power limit can only output 3.3V,100mA
18 GPIO24 Raspberry Pi:GPIO24
19 GPIO10 Raspberry Pi:GPIO10
20 GND Raspberry Pi:GND
21 GPIO09 Raspberry Pi:GPIO09
22 GPIO25 Raspberry Pi:GPIO25
23 GPIO11 Raspberry Pi:GPIO11
24 GPIO08 Raspberry Pi:GPIO08
25 GND Raspberry Pi:GND
26 GPIO07 Raspberry Pi:GPIO07
27 ID_SD Raspberry Pi:ID_SD
28 ID_SC Raspberry Pi:ID_SC
29 GPIO05 Raspberry Pi:GPIO05
30 GND Raspberry Pi:GND
31 GPIO06 Raspberry Pi:GPIO06
32 GPIO12 Raspberry Pi:GPIO12
33 GPIO13 Raspberry Pi:GPIO13
34 GND Raspberry Pi:GND
35 GPIO19 Raspberry Pi:GPIO19
36 GPIO16 Raspberry Pi:GPIO16
37 GPIO26 Raspberry Pi:GPIO26
38 GPIO20 Raspberry Pi:GPIO20
39 GND Raspberry Pi:GND
40 GPIO21 Raspberry Pi:GPIO21

3.PCAP USB PIN Definition

Pin Symbol Function
1 5V Power Supply (5V)
2 D- Data line -
3 D+ Data line +
4 NC No connection
5 GND Power Ground

I: input, O: output, P: Power

4.DVI

Pin No. Symbol I/O Function
1 Rx2+ I +LVDS Differential Data Input
2 GND P Ground
3 Rx2- I -LVDS Differential Data Input
4 Rx1+ I +LVDS Differential Data Input
5 GND P Ground
6 Rx1- I -LVDS Differential Data Input
7 Rx0+ I +LVDS Differential Data Input
8 GND P Ground
9 Rx0- I -LVDS Differential Data Input
10 RxC+ I +LVDS Differential Clock Input
11 GND P Ground
12 RxC- I -LVDS Differential Clock Input
13-14 NC - No connection
15 SCL I/O DDC(Data Display Channel) Clock
16 SDA I/O DDC(Data Display Channel) Data
17 GND P Ground
18 5V P Power Supply
19 Detect I/O Hot plug detect

5.Power-Jack

Pin No. Symbol I/O Function
1 5V P Power Supply (5V)
2 GND P Ground
3 NC - No connection

10.1 inch IPS 1024x600 TFT LCD Supporting HDMI Connector - RFH101VJ-1YH-LHB

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃
Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD － 4.7 5 5.3 V
Supply Current For LCM IDD － － 1.7 2.6 A
LED life time － － 50000 － － Hr

Related Products

Top