10.1
10.1
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size 10.1 inch
Dot Matrix (Resolution) 1280 × 3(RGB) × 800 dots
Module Dimension 230.56 × 155.01 × 6.4 mm
View Area 220.60 × 138.7 mm
Active Area 216.96(H) × 135.6(V) mm
Pixel Pitch 0.1695 × 0.1695
Display Mode Normally Black
View Direction IPS
Pixel Arrangement
(Pixel Configuration)
R.G.B. Vertical Stripe
Aspect Ratio 16:9
Backlight Type LED, Normally White
Control-Board No
Bulit-in Controller No
Interface LVDS
Touch Panel Without Touch Panel
Surface Glare
Brightness 1100 cd/㎡
Frame Through Hole No
Operating Temperature -20~70 °C
Storage Temperature -20~70 °C
TFT Series High Brightness TFT LCD

Interface Connector
A 40pin connector is used for the module electronics interface. The recommended model is F62240-H1210B manufactured by Vigorconn.

Pin No. Symbol I/O Function
1 VCOM P Common Voltage
2 VDD P Power Supply
3 VDD P Power Supply
4 NC - No connection
5 NC - No connection
6 NC - No connection
7 GND P Ground
8 Rxin0- I -LVDS Differential Data Input
9 Rxin0+ I +LVDS Differential Data Input
10 GND P Ground
11 Rxin1- I -LVDS Differential Data Input
12 Rxin1+ I +LVDS Differential Data Input
13 GND P Ground
14 Rxin2- I -LVDS Differential Data Input
15 Rxin2+ I +LVDS Differential Data Input
16 GND P Ground
17 RxCLK- I -LVDS Differential Clock Input
18 RxCLK+ I +LVDS Differential Clock Input
19 GND P Ground
20 Rxin3- I -LVDS Differential Data Input
21 Rxin3+ I +LVDS Differential Data Input
22 GND P Ground
23 NC - No connection
24 NC - No connection
25 GND P Ground
26 NC - No connection
27 NC - No connection
28 NC - No connection
29 AVDD P No connection
30 GND P Ground
31 NC - No connection
32 NC - No connection
33 NC - No connection
34 NC - No connection
35 VGL P Gate OFF Voltage
36 NC - No connection
37 NC - No connection
38 VGH P Gate ON Voltage
39 NC - No connection
40 NC - No connection

I: input, O: output, P: Power

10.1 LVDS, IPS Sun Readable Display - RFK1010F-AYH-LNN

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 70
Storage Temperature TST -20 70

Typical Operation Conditions

Item Symbol Values Unit
Min Typ Max
Power voltage VDD 2.3 2.5 2.7 V
AVDD 8.0 8.2 8.4 V
VGH 21.7 22 22.3 V
VGL -7.3 -7 -6.7 V
Input signal voltage TOP 2.7 3.0 3.3 V
Input logic high voltage TST 0.8VDD - 3.6 V
Input logic low voltage   0 - 0.2VDD V

Current Consumption

Item Symbol Values Unit
Min Typ Max
Current for Driver IGH - 705 750 uA
IGL - 705 750 uA
IVDD - 95 120 mA
IAVDD - 45 70 mA
Top