1920x720 Display, 1920x720 LCD 12.3, IPS, LVDS, High Brightness, Wide Temperature TFT
1920x720 Display, 1920x720 LCD 12.3, IPS, LVDS, High Brightness, Wide Temperature TFT

12.3" TFT 1920x720 LCD Display

Model No. RFY1230B-AWH-LNN

RFY1230B-AWH-LNN is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit and a back light system. This TFT LCD has a 12.28”inch diagonally measured active display area with 5760 x 720 dots (1920 horizontal by 720 vertical pixels) resolution. RFY1230B-AWH-LNN 1920x720 TFT display module supports 2ch-LVDS interface. It features high contrast, providing contrast ratio (typical value) 1,100: 1 with brightness 800 cd/m2, 8:3 aspect ratio and viewing angle 85/85/85/85.

The supply voltage of RFY1230B-AWH-LNN 1920x720 TFT LCD display module ranges from 3.0V-3.6V, the typical value is 3.3V. The module works within wide temperature range from-30 to +85℃,Storage Temperature covers from-40 to +90℃. Feel free to send us inquiry if you’d like to know more information.

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size (Diagonal) 12.3 inch
Dot Matrix / Resolution 1920 RGB (H) × 720(V) dots
Module Dimension 308.1(H) × 130.0(V) × 7.6 mm
Active Area 292.032(H) × 109.512(V) mm
Dot / Pixel Pitch 0.1521(H) × 0.1521 (V) mm
LCD Type TFT, Normally Black, Transmissive
View Direction 85/85/85/85 (IPS)
Backlight Type LED, Normally White
Control Board No
Interface 2ch-LVDS
Touch Panel Without Touch Screen
Surface Anti-Glare
Brightness 800 cd/㎡
O-Film No
Mounting Hole No
Operating Temperature -30~+85 °C
Storage Temperature -40~+90 °C
TFT Series High BrightnessTFT, Wide Temperature TFT, Bar Type TFT, IPS TFT LCD, LVDS TFT Display

TFT LCD MODULE

FPC connector is used for electronics interface.
AORORA F31L-1A7H1-21050 , 50PIN

Pin no. Symbol Function
1 GND Ground
2 NC No connector
3 VCC Digital Power
4 VCC Digital Power
5 GND Panel Power
6 GND Panel Power
7 NC No connector
8 NC No connector
9 GND Ground
10 ORXIN0- Odd pixel negative LVDS differential clock input
11 ORXIN0+ Odd pixel positive LVDS differential clock input
12 ORXIN1- Odd pixel negative LVDS differential clock input
13 ORXIN1+ Odd pixel positive LVDS differential clock input
14 ORXIN2- Odd pixel negative LVDS differential clock input
15 ORXIN2+ Odd pixel positive LVDS differential clock input
16 ORXCLKIN- Odd pixel negative LVDS differential clock input
17 ORXCLKIN+ Odd pixel positive LVDS differential clock input
18 ORXIN3- Odd pixel negative LVDS differential clock input
19 ORXIN3+ Odd pixel positive LVDS differential clock input
20 ERXIN0- Even pixel negative LVDS differential clock input
21 ERXIN0+ Even pixel positive LVDS differential clock input
22 ERXIN1- Even pixel negative LVDS differential clock input
23 ERXIN1+ Even pixel positive LVDS differential clock input
24 ERXIN2- Even pixel negative LVDS differential clock input
25 ERXIN2+ Even pixel positive LVDS differential clock input
26 ERXCLKIN- Even pixel negative LVDS differential clock input
27 ERXCLKIN+ Even pixel positive LVDS differential clock input
28 ERXIN3- Even pixel negative LVDS differential clock input
29 ERXIN3+ Even pixel positive LVDS differential clock input
30 GND Ground
31 NC No connector
32 RESETB Global reset pin, active low.
33 STBYB Standby mode, active low.
34 CA3 Output signal to indicate self protection mode, when DE,HS,VS,DCLK, any of these signals is missing, it will become High. If using this pin, CA3 need to pulled low by an resistor,else , let it floating.
35 SCL Serial interface clock input. (User folating)
36 SDA Serial interface data input/output.(User folating)
37 CSB Serial interface chip enable.(User folating)
38 GND Power Ground
39 GND Power Ground
40 NC No connector
41 LEDA LED power (Anode)
42 LEDA LED power (Anode)
43 LEDA LED power (Anode)
44 NC No connector
45 LEDK1 Cathode 1
46 LEDK2 Cathode 2
47 LEDK3 Cathode 3
48 LEDK4 Cathode 4
49 NTC_A NTC_Anode
50 NTC_K NTC_Cathode

1920x720 Display, 1920x720 LCD 12.3, IPS, LVDS, High Brightness, Wide Temperature TFT

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 +85
Storage Temperature TST -40 +90

TFT LCD Module

Item Symbol Min. Typ. Max. Unit
Supply Voltage VCC 3 3.3 3.6 V
Input signal voltage ViH VCC *0.7 - VCC V
ViL 0 - VCC *0.3 V
Current of power supply ICC -- -- 500 mA

Switching Characteristics for LVDS Receiver

Item Symbol Min. Typ. Max. Unit Conditions
Differential Input High Threshold Vth 100 300 mV VCM=1.2V
Differential Input Low Threshold Vtl -300 -100 mV
Input Current
Differential input Voltage
IIN
|VID|
-10 +10 uA  
0.2 0.6 V  
Common Mode Voltage Offset VCM 1 1.2 1.7-(|VID|/2) V  

Backlight Unit

Parameter Symbol Min Typ Max Units Condition
LED Current IF -- 280 -- mA Ta=25℃
LED Voltage VF -- -- 37.4 Volt Ta=25℃
LED Life-Time N/A 30,000 -- -- Hour Ta=25℃
IF=70mA Note (2)
Top