3.5 Resistive Touch Panel TFT LCD Module - RFC350L-AIW-DNS
3.5 Resistive Touch Panel TFT LCD Module - RFC350L-AIW-DNS
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size (Diagonal) 3.5 inch
Dot Matrix / Resolution 320 × RGB × 240(TFT) dots
Module Dimension 76.84(W) × 63.84(H) × 4.37(D) mm
View Area 72.10 × 54.60 mm
Active Area 70.08 × 52.56 mm
Dot / Pixel Pitch 0.073 × 0.219 mm
LCD Type TFT, Normally White, Transmissive
View Direction 12 o’clock
Gray Scale Inversion Direction 6 o’clock
Aspect Ratio 4:3
Backlight Type LED, Normally White
Control-Board No
Interface RGB
Touch Panel Resistive Touch Panel, RTP
Surface Anti-Glare
Brightness 300 cd/㎡
Frame Through Hole Option
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C
TFT Series Standard TFT LCD Display
Pin Symbol Function
1 LED- Power for LED backlight cathode
2 LED- Power for LED backlight cathode
3 LED+ Power for LED backlight anode
4 LED+ Power for LED backlight anode
5 YU Top electrode
6 XL Left electrode
7 NC No connect
8 /RESET Hardware reset
9 SPENA Chip select pin of serial interface
10 SPCLK Clock pin of serial interface
11 SPDAT Data input pin in serial mode
12 B0 Data bus
13 B1 Data bus
14 B2 Data bus
15 B3 Data bus
16 B4 Data bus
17 B5 Data bus
18 B6 Data bus
19 B7 Data bus
20 G0 Data bus
21 G1 Data bus
22 G2 Data bus
23 G3 Data bus
24 G4 Data bus
25 G5 Data bus
26 G6 Data bus
27 G7 Data bus
28 R0 Data bus
29 R1 Data bus
30 R2 Data bus
31 R3 Data bus
32 R4 Data bus
33 R5 Data bus
34 R6 Data bus
35 R7 Data bus
36 HSYNC Line synchronization signal
37 VSYNC Frame synchronization signal
38 DCLK Dot-clock signal and oscillator source
39 NC No connect
40 NC No connect
41 VCC Power Supply
42 VCC Power Supply
43 YD Bottom electrode
44 XR Right electrode
45 NC No connect
46 NC No connect
47 NC No connect
48 SEL2 Input pin to select input interface mode
49 SEL1 Input pin to select input interface mode
50 SEL0 Input pin to select input interface mode
51 NC No connect
52 DE Display enable pin from controller. Internal pull high
Connect to VCCIO or floating if not used
53 DGND System ground pin of the IC.
Connect to system ground.
54 AVSS Grounding for analog circuit
Connect to system ground

3.5 Resistive Touch Panel TFT LCD Module - RFC350L-AIW-DNS

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Operating conditions

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VCC 3.0 3.3 3.6 V
Supply Current For LCM ICC 8.6 15 mA
Top