MIPI IPS TFT LCD Display 3.5"

Model No. RFI350U-AYW-MNN

RFI350U-AYW-MNN is a 3.5-inch, vertical/portrait IPS TFT Display. Its resolution is 320×480 pixels. This TFT LCD Display 3.5" uses IPS screen which allows users to see the display clearly at wider angles (80/80/80/80 degree) which is one of the most popular techniques on the market now.

This TFT LCD Display 3.5" has driver IC ILI9488 supporting 1-lane MIPI interface. The brightness is 600 cd/m2 with contrast ratio (typical value) 700:1. The power supply voltage (typical value) is 1.8/2.8V. The module works within the temperature -20 to+70℃, storage temperature covers from-30 to+80℃.

Inquiry or Demo Code Datasheet Back Previous Next

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
TFT Series	Wide View TFT LCD, IPS TFT LCD
Size (Diagonal)	3.5	inch
Dot Matrix / Resolution	320 × RGB × 480 (TFT)	dots
Module Dimension	54.5(W) × 83.0(H) × 2.46(D)	mm
Active Area	48.96 × 73.44	mm
Dot / Pixel Pitch	0.153 × 0.153	mm
LCD Type	TFT, Normally Black, Transmissive
View Direction	80/80/80/80 (IPS)
Aspect Ratio	Portrait
Backlight Type	LED, Normally White
Control Board	No
TFT Driver IC	ILI9488 or Equivalent
Interface	1-Lane MIPI
Touch Panel	Without Touch Screen
Surface	Anti-Glare
Brightness	600	cd/㎡
Mounting Hole	No
Operating Temperature	-20~+70	°C
Storage Temperature	-30~+80	°C

LCM PIN Definition

NO	Symbol	Function	I/O
1	VCI	A supply voltage to the analog circuit. Connect to an external power supply of 2.5 ~ 3.3V. Connect to a stabilizing capacitor between VCI and GND.	P
2	IOVCC	A supply voltage to the digital circuit. Connect to an external power supply of 1.65 ~ 3.3V.	P
3	RESET	Reset input signal Initialize the chip with a low input. Be sure to execute a power-on reset after supplying power.	I
4	GND	Ground	I
5	MIPI_CLK_P	Positive polarity of low voltage differential clock signal Leave the pin open when not in use.	I
6	MIPI_CLK_N	Negative polarity of low voltage differential clock signal Leave the pin open when not in use	I
7	GND	Ground	I
8	MIPI_DATA_P	Positive polarity of low voltage differential data signal Leave the pin open when not in use.	I
9	MIPI_DATA_N	Negative polarity of low voltage differential data signal Leave the pin open when not in use.	I
10	GND	Ground	I
11	VLED+	Anode of LED backlight.
12	VLED-	Cathode of LED backlight