- General Specs
- Interface Pin Function
- Contour Drawing
- Absolute Maximum Ratings
- Electrical Characteristics
Item | Dimension | Unit |
---|---|---|
Size (Diagonal) | 3.5 | inch |
Dot Matrix / Resolution | 320 × RGB × 240(TFT) | dots |
Module Dimension | 76.84 × 63.84 × 3.27 | mm |
Viewing Area | 73.1 × 55.5 | mm |
Active Area | 70.08 × 52.56 | mm |
Dot / Pixel Pitch | 0.073 × 0.219 | mm |
LCD Type | TFT, Normally Black, Transmissive | |
View Direction | Wide View (IPS) | |
Aspect Ratio | 4:3 | |
Backlight Type | LED, Normally White | |
Control Board | No | |
TFT Driver IC | ST7272A or equivalent | |
Interface | 24-bit RGB | |
Touch Panel | Without Touch Panel | |
Surface | Glare | |
Brightness | 1000 | cd/㎡ |
Mounting Hole | No | |
Operating Temperature | -30~+85 | °C |
Storage Temperature | -40~+85 | °C |
TFT Series | Wide Temperature TFT, High Brightness TFT LCD, IPS TFT LCD |
LCM PIN Definition
Pin | Symbol | Function |
---|---|---|
1 | LED- | Power for LED backlight cathode |
2 | LED- | Power for LED backlight cathode |
3 | LED+ | Power for LED backlight anode |
4 | LED+ | Power for LED backlight anode |
5 | NC(YU) | No connect |
6 | NC(XL) | No connect |
7 | NC(SPI_IIC_SEL) | No connect |
8 | /RESET | Hardware reset |
9 | NC(CS) | No connect |
10 | NC(SDA) | No connect |
11 | NC(SCL) | No connect |
12 | B0 | Data bus |
13 | B1 | Data bus |
14 | B2 | Data bus |
15 | B3 | Data bus |
16 | B4 | Data bus |
17 | B5 | Data bus |
18 | B6 | Data bus |
19 | B7 | Data bus |
20 | G0 | Data bus |
21 | G1 | Data bus |
22 | G2 | Data bus |
23 | G3 | Data bus |
24 | G4 | Data bus |
25 | G5 | Data bus |
26 | G6 | Data bus |
27 | G7 | Data bus |
28 | R0 | Data bus |
29 | R1 | Data bus |
30 | R2 | Data bus |
31 | R3 | Data bus |
32 | R4 | Data bus |
33 | R5 | Data bus |
34 | R6 | Data bus |
35 | R7 | Data bus |
36 | HSYNC | Horizontal sync signal, default is negative polarity. |
37 | VSYNC | Vertical sync signal, default is negative polarity. |
38 | DCLK | Dot-clock signal and oscillator source |
39 | NC(HDIR) | No connect |
40 | NC(VDIR) | No connect |
41 | VCC | Power Supply |
42 | VCC | Power Supply |
43 | NC(YD) | No connect |
44 | NC(XR) | No connect |
45 | NC(PARA_SERI) | No connect |
46 | NC(BIST_EN) | No connect |
47 | NC(ENPROG) | No connect |
48 | NC | No connect |
49 | NC | No connect |
50 | NC | No connect |
51 | NC(DISP) | No connect |
52 | DE | Data input enable. Display access is enabled when DE is “H”. |
53 | GND | Ground |
54 | GND | Ground |
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -30 | - | +85 | ℃ |
Storage Temperature | TST | -40 | - | +85 | ℃ |
Operating conditions
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Supply Voltage For LCM | VCC | 3.0 | 3.3 | 3.6 | V |
Supply Current For LCM | ICC | — | 20 | 30 | mA |
LED driving conditions
Parameter | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
LED current | - | - | 40 | - | mA |
Power Consumption | - | 540 | 600 | 660 | mW |
LED voltage | LED+ | 13.5 | 15 | 16.5 | V |
LED Life Time | - | - | 50,000 | - | Hr |