Resistive Touch Screen Color TFT 4.3 with Controller Board - RFE43DP-EIW-DBS

Resistive Touch Screen Color TFT 4.3" with Controller Board

Model No. RFE43DP-EIW-DBS

RFE43DP-EIW-DBS is one of the models in our P series---4.3-inch TFT-LCD display module with controller board and Resistive touch. The resolution of this module is 480 x 272pixels, and it has 4 screw holes & metal frame allowing for quick mounting. The P series mainly uses RA8875 Controller IC. The TFT modules of this series are all characterized by the 36pin MCU 8080 8/16-bits Pin define, and 8/16-bits 6800 Pin define Interface can be selected through Jump. In addition, you can request external expansion of Chinese fonts (Optional) and flash memory. Through the built-in PWM Command of RA8875 IC, it can control its backlight and DMA (Direct Memory Access) to accelerate graphics.

The brightness is 350 cd/m2 with contrast ratio 500:1. LCM voltage ranges from 3V-3.6V, typical value is 3.3V. Operating temperature covers from -20~+70℃, storage temperature range is from -30~+80℃.

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size (Diagonal) 4.3 inch
Dot Matrix / Resolution 480 × RGB × 272 (TFT) dots
Module Dimension 106.7 × 83.98 × 10.55 mm
View Area 98.7 × 57.5 mm
Active Area 95.04 × 53.856 mm
Dot / Pixel Pitch 0.066 × 0.198 mm
LCD Type TFT, Normally White, Transmissive
View Direction 12 o’clock
Gray Scale Inversion Direction 6 o’clock
Aspect Ratio 16:9
Backlight Type LED, Normally White
Control-Board Yes
Built-in Controller RA8875
Interface Digital 8080 family MPU
Touch Panel Resistive Touch Panel, RTP
Surface Anti-Glare
Brightness 350 cd/㎡
Frame Through Hole Yes
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C
TFT Series TFT LCD with Controller Board (P series)

LCM PIN Definition (CON3)

Pin Symbol Function
1 GND System ground
2 VDD Power Supply : +3.3V
3 NC No connect
4 RS Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~22 DB0~DB15 Data bus
23 WAIT Wait Signal Output(H:active)
24 RTP _INT RTP Interrupt
25 CS Chip select
26 RST Hardware reset
27 DIP ON Display control H: On \ L:Off
28~32 NC No connect
33~34 VLED- Power for LED backlight cathode
35~36 VLED+ Power for LED backlight anode

Resistive Touch Screen Color TFT 4.3 with Controller Board - RFE43DP-EIW-DBS

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Operating conditions: (CON3.Pin1=GND, Pin2=VDD)

Item Symbol Condition Min Typ Max Unit
Supply Voltage For LCM VDD 3.0 3.3 3.6 V
Supply Current For LCM IDD 65 100 mA

Backlight driving conditions (CON3.Pin33,34=VLED-, Pin35,36=VLED+)

Parameter Symbol Min Typ Max Unit
Operation Current For LED Driver VLED+=3.3V 270 - 405 mA
Power Consumption VLED+=3.3V 891 - 1337 mW
Supply Voltage For LED Driver VLED+ 3.3 - 5 V
LED Life Time   - 50,000 - Hr
Top