LCD TFT Display (RTP) 4.3 with Controller Board - RFE43DQ-EIW-DBS

LCD TFT Display (RTP) 4.3" with Controller Board

Model No. RFE43DQ-EIW-DBS

RFE43DQ-EIW-DBS is one of the models in our Q series--- 4.3-inch TFT-LCD display module with controller board and Resistive touch. The resolution of this module is 480 x272 pixels, and it has 4 screw holes & metal frame allowing for quick mounting. The Q series mainly uses IC SSD1963. TFT modules of this series are all characterized by 36-pin MCU 8080 8/16-bit pin define, and the 8/16-bit 6800 pin define interface can be selected through Jump. Compared to the P series, functions of Q series are simple and pricing is relatively lower.

The brightness is 350 cd /m2 with contrast ratio 500:1. LCM voltage ranges from 3V-3.3V, typical value is 3.1V. Operating temperature covers from -20~+70℃, storage temperature range is from -30~+80℃.

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size (Diagonal) 4.3 inch
Dot Matrix / Resolution 480 × RGB × 272 (TFT) dots
Module Dimension 106.7 × 83.98 × 8.05 mm
View Area 98.7 × 57.5 mm
Active Area 95.04 × 53.856 mm
Dot / Pixel Pitch 0.066 × 0.198 mm
LCD Type TFT, Normally White, Transmissive
View Direction 12 o’clock
Gray Scale Inversion Direction 6 o’clock
Aspect Ratio 16:9
Backlight Type LED, Normally White
Control-Board Yes
Built-in Controller SSD1963
Interface Digital 8080 family MPU 8bit/16bit
Touch Panel Resistive Touch Panel, RTP
Surface Anti-Glare
Brightness 350 cd/㎡
O-Film No
Frame Through Hole Yes
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C
TFT Series TFT LCD with Controller Board (Q series)

LCM PIN Definition (CON3)

Pin Symbol Function
1 GND System round pin of the IC.   
Connect to system ground.
2 VDD Power Supply : +3.3V
3 BL_E Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7 DB0 Data bus
8 DB1 Data bus
9 DB2 Data bus
10 DB3 Data bus
11 DB4 Data bus
12 DB5 Data bus
13 DB6 Data bus
14 DB7 Data bus
15 DB8 Data bus(When select 8bits Mode, this pin is NC)
16 DB9 Data bus (When select 8bits Mode, this pin is NC)
17 DB10 Data bus (When select 8bits Mode, this pin is NC)
18 DB11 Data bus (When select 8bits Mode, this pin is NC)
19 DB12 Data bus (When select 8bits Mode, this pin is NC)
20 DB13 Data bus (When select 8bits Mode, this pin is NC)
21 DB14 Data bus ((When select 8bits Mode, this pin is NC)
22 DB15 Data bus (When select 8bits Mode, this pin is NC)
23 NC No connection
24 NC No connection
25 CS Chip select
26 RESET Hardware reset
27 DIP ON Display control H: On \ L:Off
28 NC No connection
29 XL Left electrode
30 YU Top electrode
31 XR Right electrode
32 YD Bottom electrode
33 VLED- VLED- for B/L LED inverter (GND)
34 VLED- VLED- for B/L LED inverter (GND)
35 VLED+ VLED+ for B/L LED inverter (+3.3V)
36 VLED+ VLED+ for B/L LED inverter (+3.3V)

LCD TFT Display (RTP) 4.3 with Controller Board - RFE43DQ-EIW-DBS

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Operating conditions: (CON3.Pin1=GND, Pin2=VDD)

Item Symbol Condition Min. Typ. Max. Unit
Supply Voltage For LCM VDD 3.0 3.1 3.3 V
Supply Current For LCM IDD 200 300 mA

Backlight driving conditions (CON3.Pin33,34=VLED-, Pin35,36=VLED+)

Parameter Symbol Min. Typ. Max. Unit
Operation Current For LED Driver VLED+=3.3V 270 - 405 mA
Power Consumption VLED+=3.3V 891 - 1337 mW
Supply Voltage For LED Driver VLED+ 3.3 - 5 V
LED Life Time   - 50,000 - Hr
Top