5 inch HDMI Display,5 inch HDMI Touch LCD Display,5 inch HDMI Touch Screen

5 inch HDMI-Compatible Touch Screen LCD Display

Model No. RFF50VF-1YH-DHG

RFF50VF-1YH-DHG is a 5-inch HDMI-compatible touch screen TFT LCD display supporting HDMI connector (only DVI signal) and projected capacitive touch screen (PCAP). This TFT module uses IPS screen which allows users to see the display clearly at wider angles. Also, this module has 800x480 resolutions for better image quality.

RFF50VF-1YH-DHG comes with PCAP touch panel supporting USB interface; part number (RFF50VF-1YH-DHS) for resistive touch panel is also available, too. The PCAP touchscreen has a built-in IC ILI2130 which enables 1-point/2-point/multiple-point touch. The brightness is 750 cd/m2 with contrast ratio 1,000:1. LCM voltage ranges from 4.9V~5.1V, typical value is 5V. Operating temperature covers from -20~+70℃, storage temperature range is from -30~+80℃.

HDMI connector and USB cable are optional accessories. Customers can use them to connect the module with Raspberry Pi. The module is able to support Raspberry Pi up to 3B+ (Pi 4B is included). Please note the standard package of RFF50VF-1YH-DHG doesn’t include any HDMI connector or USB cable. Besides, customers need to be aware that it’s necessary to prepare a micro HDMI to HDMI connector on their own.

Inquiry or Demo Code

Datasheet

Back

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
TFT Series	Support HDMI Signal TFT LCD Display
Size (Diagonal)	5	inch
Dot Matrix / Resolution	800 × 3(RGB) × 480	dots
Module Dimension	120.7 × 75.8 × 23.2 (Max)	mm
Active Area	108.0 × 64.8	mm
Dot / Pixel Pitch	0.135 × 0.135	mm
LCD Type	TFT, Normally Black, Transmissive
View Direction	80/80/80/80
Aspect Ratio	5:3
Backlight Type	LED, Normally White
Control Board	Yes
Built-in Controller	TFP401
Interface	HDMI (only for DVI)
PCAP FW Version	0x07.0x00.0x00.0x00.0xA1.0x25.0x50.0x00
PCAP IC	ILI2130 or equivalent
PCAP Interface	USB
PCAP Resolution	16384*16384
Detect Points	1 / 2 / Option	Points
Touch Panel	Projected Capacitive Touchscreen, PCAP
Surface	Glare
Brightness	750	cd/㎡
O-Film	Yes
Operating Temperature	-20~+70	°C
Storage Temperature	-30~+80	°C

1. LCM PIN Definition(CON4)

Pin	Symbol	Function
1	NC	No connection
2	5V	Raspberry Pi:Power 5V
3	GPIO02	Raspberry Pi:GPIO02
4	5V	Raspberry Pi:Power 5V
5	GPIO03	Raspberry Pi:GPIO03
6	GND	Raspberry Pi:GND
7	GPIO04	Raspberry Pi:GPIO04
8	GPIO14	Raspberry Pi:GPIO14
9	GND	Raspberry Pi:GND
10	GPIO15	Raspberry Pi:GPIO15
11	GPIO17	Raspberry Pi:GPIO17
12	GPIO18	Raspberry Pi:GPIO18 (Backlight Enable)
13	GPIO27	Raspberry Pi:GPIO27
14	GND	Raspberry Pi:GND
15	GPIO22	Raspberry Pi:GPIO22
16	GPIO23	Raspberry Pi:GPIO23
17	NC	No connection
18	GPIO24	Raspberry Pi:GPIO24
19	GPIO10	Raspberry Pi:GPIO10
20	GND	Raspberry Pi:GND
21	GPIO09	Raspberry Pi:GPIO09
22	GPIO25	Raspberry Pi:GPIO25
23	GPIO11	Raspberry Pi:GPIO11
24	GPIO08	Raspberry Pi:GPIO08
25	GND	Raspberry Pi:GND
26	GPIO07	Raspberry Pi:GPIO07
27	ID_SD	Raspberry Pi:ID_SD
28	ID_SC	Raspberry Pi:ID_SC
29	GPIO05	Raspberry Pi:GPIO05
30	GND	Raspberry Pi:GND
31	GPIO06	Raspberry Pi:GPIO06
32	GPIO12	Raspberry Pi:GPIO12
33	GPIO13	Raspberry Pi:GPIO13
34	GND	Raspberry Pi:GND
35	GPIO19	Raspberry Pi:GPIO19
36	GPIO16	Raspberry Pi:GPIO16
37	GPIO26	Raspberry Pi:GPIO26
38	GPIO20	Raspberry Pi:GPIO20
39	GND	Raspberry Pi:GND
40	GPIO21	Raspberry Pi:GPIO21

2. (CON5)

Pin	Symbol	Function	Remark
1	3.3V	TFT Module Power limit can only output 3.3V,100mA	Note1
2	5V	Raspberry Pi:Power 5V
3	GPIO02	Raspberry Pi:GPIO02
4	5V	Raspberry Pi:Power 5V
5	GPIO03	Raspberry Pi:GPIO03
6	GND	Raspberry Pi:GND
7	GPIO04	Raspberry Pi:GPIO04
8	GPIO14	Raspberry Pi:GPIO14
9	GND	Raspberry Pi:GND
10	GPIO15	Raspberry Pi:GPIO15
11	GPIO17	Raspberry Pi:GPIO17
12	GPIO18	Raspberry Pi:GPIO18 (Backlight Enable)
13	GPIO27	Raspberry Pi:GPIO27
14	GND	Raspberry Pi:GND
15	GPIO22	Raspberry Pi:GPIO22
16	GPIO23	Raspberry Pi:GPIO23
17	3.3V	TFT Module Power limit can only output 3.3V,100mA	Note1
18	GPIO24	Raspberry Pi:GPIO24
19	GPIO10	Raspberry Pi:GPIO10
20	GND	Raspberry Pi:GND
21	GPIO09	Raspberry Pi:GPIO09
22	GPIO25	Raspberry Pi:GPIO25
23	GPIO11	Raspberry Pi:GPIO11
24	GPIO08	Raspberry Pi:GPIO08
25	GND	Raspberry Pi:GND
26	GPIO07	Raspberry Pi:GPIO07
27	ID_SD	Raspberry Pi:ID_SD
28	ID_SC	Raspberry Pi:ID_SC
29	GPIO05	Raspberry Pi:GPIO05
30	GND	Raspberry Pi:GND
31	GPIO06	Raspberry Pi:GPIO06
32	GPIO12	Raspberry Pi:GPIO12
33	GPIO13	Raspberry Pi:GPIO13
34	GND	Raspberry Pi:GND
35	GPIO19	Raspberry Pi:GPIO19
36	GPIO16	Raspberry Pi:GPIO16
37	GPIO26	Raspberry Pi:GPIO26
38	GPIO20	Raspberry Pi:GPIO20
39	GND	Raspberry Pi:GND
40	GPIO21	Raspberry Pi:GPIO21

Note1: The 3.3V supply current is limited; please pay special attention to use

PCAP USB PIN Definition(CON3)

Pin	Symbol	Function
1	5V	Power 5V
2	D-	Data line -
3	D+	Data line +
4	NC	No connection
5	GND	Power Ground

4. DVI

Pin No.	Symbol	I/O	Function
1	Rx2+	I	+LVDS Differential Data Input
2	GND	P	Ground
3	Rx2-	I	-LVDS Differential Data Input
4	Rx1+	I	+LVDS Differential Data Input
5	GND	P	Ground
6	Rx1-	I	-LVDS Differential Data Input
7	Rx0+	I	+LVDS Differential Data Input
8	GND	P	Ground
9	Rx0-	I	-LVDS Differential Data Input
10	RxC+	I	+LVDS Differential Clock Input
11	GND	P	Ground
12	RxC-	I	-LVDS Differential Clock Input
13-14	NC	-	No connection
15	SCL	I/O	DDC(Data Display Channel) Clock
16	SDA	I/O	DDC(Data Display Channel) Data
17	GND	P	Ground
18	5V	P	Power Supply
19	Detect	I/O	Hot plug detect