5 inch 800×480 High Brightness IPS TFT LCD Display - RFF500F-AWH-DNN - Raystar
5 inch 800×480 High Brightness IPS TFT LCD Display - RFF500F-AWH-DNN - Raystar
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size (Diagonal) 5 inch
Dot Matrix / Resolution 800 × 3(RGB) × 480 dots dots
Module Dimension 120.7(W) × 75.8(H) × 2.8(D) mm
Active Area 108(W) × 64.8 (H) mm
Bezel Opening Area 110.7 × 67.4
Dot / Pixel Pitch 0.135(W) × 0.135(H) mm
LCD Type TFT, Normally Black, Transmissive
View Direction 80/80/80/80 (IPS)
Aspect Ratio 16:9
Backlight Type LED, Normally White
Control-Board No
TFT Driver IC ST7262 or equivalent
Interface 24 bit R.G.B.
Touch Panel Without Touch Panel
Surface Anti-Glare
Brightness 1000 cd/㎡
Frame Through Hole No
Operating Temperature -30~+80 °C
Storage Temperature -30~+80 °C
TFT Series Wide View TFT, High Brightness TFT LCD, IPS TFT LCD, Wide Temperature TFT

LCM PIN Definition

FPC Connector is used for the module electronics interface.

Pin Symbol Function
1 VLED- Power for LED backlight (Cathode)
2 VLED+ Power for LED backlight (Anode)
3 GND Power Ground
4 VDD Power voltage
5 R0 Red data (LSB)
6 R1 Red data
7 R2 Red data
8 R3 Red data
9 R4 Red data
10 R5 Red data
11 R6 Red data
12 R7 Red data(MSB)
13 G0 Green data(LSB)
14 G1 Green data
15 G2 Green data
16 G3 Green data
17 G4 Green data
18 G5 Green data
19 G6 Green data
20 G7 Green data(MSB)
21 B0 Blue data(LSB)
22 B1 Blue data
23 B2 Blue data
24 B3 Blue data
25 B4 Blue data
26 B5 Blue data
27 B6 Blue data
28 B7 Blue data(MSB)
29 GND Power Ground
30 CLK Sample clock
31 DISP Display on/off
32 NC No connection
33 NC No connection
34 DE Data input enable
35 NC No connection
36 GND Power Ground
37 NC No connection
38 NC No connection
39 NC No connection
40 NC No connection

5 inch 800×480 High Brightness IPS TFT LCD Display - RFF500F-AWH-DNN - Raystar

Item Symbol Min Typ Max Unit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80

Typical Operation Conditions

Item Symbol Values Unit
Min. Typ. Max.
Power voltage VDD 3.0 3.3 3.6 V
Current for Driver(Black) IDD - 65 97.5 mA
Input logic high voltage VIH 0.7 VDD - VDD V
Input logic low voltage VIL 0 - 0.3 VDD  
Top