RF3500D-AYW-MNN

5" IPS, MIPI TFT LCD Panel

Model No. RF3500D-AYW-MNN

RF3500D-AYW-MNN is a 5.0" TFT-LCD display that uses amorphous silicon TFT as a switching device. The module dimension is 66.10(W) × 120.4(H) × 1.85(D) and its active area is 62.1(W) × 110.4(H) mm. It has a resolution of 720x1280 pixels, an aspect ratio of 16:9, and the viewing angle is 80/80/80/80. The TFT Drive IC of the display is ILI9881C.

Following the RoHS standard, the display interface is 4-lane MIPI, and the backlight type is LED, normally white. It features a contrast ratio of 800: 1 and a brightness of 300 cd/m2 (typical value). The supply voltage is from 2.5V to 3.6V. The operating temperature ranges from -20℃ to +70℃, and its storage temperature is from -30℃ to +80℃.

Inquiry or Demo Code

Datasheet

Back

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
TFT Series	Standard TFT LCD, IPS TFT LCD
Size (Diagonal)	5	inch
Dot Matrix / Resolution	720 × 3(RGB) × 1280	dots
Module Dimension	66.10(W) × 120.4(H) × 1.85(D)	mm
Active Area	62.1(W) × 110.4(H)	mm
Dot / Pixel Pitch	0.08625(W) × 0.08625(H)	mm
LCD Type	TFT, Normally Black, Transmissive
View Direction	80/80/80/80 (IPS)
Aspect Ratio	16:9
Backlight Type	LED, Normally White
Control Board	No
TFT Driver IC	ILI9881C or Equivalent
Interface	4-Lanes MIPI DSI
Touch Panel	Without Touch Panel
Surface	Glare
Brightness	300	cd/㎡
Mounting Hole	No
Operating Temperature	-20~+70	°C
Storage Temperature	-30~+80	°C

LCM PIN Definition

Pin	Symbol	Function
1	NC/TP_GND	No connection
2	NC/TP_SDA	No connection
3	NC/TP_SCL	No connection
4	NC/TP_INT	No connection
5	NC/TP_RST	No connection
6	NC/YU	No connection
7	NC/XL	No connection
8	NC/YD	No connection
9	NC/XR	No connection
10-11	VCI	Power supply for analog circuits. Connect to an external power supply of 2.5V to 3.6V
12-13	NC	No connection
14	RESET	The external reset input Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power. Fix to VDDI level when not in use.
15	TE	Tearing effect output pin. Leave the pin open when not in use.
16	NC	No connection
17-18	GND	Power ground
19-20	IOVCC	Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V
21	GND	Power ground
22	D3P	MIPI DSI differential data pair. (Data lane 3)
23	D3N	MIPI DSI differential data pair. (Data lane 3)
24	GND	Power ground
25	D2P	MIPI DSI differential data pair. (Data lane 2)
26	D2N	MIPI DSI differential data pair. (Data lane 2)
27	GND	Power ground
28	CLKP	MIPI DSI differential clock pair
29	CLKN	MIPI DSI differential clock pair
30	GND	Power ground
31	D1P	MIPI DSI differential data pair. (Data lane 1)
32	D1N	MIPI DSI differential data pair. (Data lane 1)
33	GND	Power ground
34	D0P	MIPI DSI differential data pair. (Data lane 0)
35	D0N	MIPI DSI differential data pair. (Data lane 0)
36-37	GND	Power ground
38	LED+	Power for LED backlight anode
39	LED1-	Power for LED1 backlight cathode
40	LED2-	Power for LED2 backlight cathode