5 inch 800x480 IPS TFT LCD Display with RTP / Controller Board / BT816Q IC - RFF500F-EYH-DSS
5 inch 800x480 IPS TFT LCD Display with RTP / Controller Board / BT816Q IC - RFF500F-EYH-DSS

5 inch 800x480 IPS TFT LCD Display with RTP

Model No. RFF500F-EYH-DSS

RFF500F-EYH-DSS is a TFT LCD display with IPS (In-Plane-Switching Liquid Crystal) panel, controller board and resistive touch panel; IPS technique allows viewers to view the screen from wider angles (80/80/80/80 degree). The brightness is 650 cd/m2 with contrast ratio 1000:1(typical value). This 5 inch TFT display module has a built-in controller IC BT816Q supporting SPI/QSPI interface.

BT815/6 with EVE (Embedded Video Engine) technology simplifies the system architecture for advanced human machine interfaces (HMIs) by providing support for display, audio, and touch as well as an object oriented architecture approach that extends from display creation to the rendering of the graphics.

Related products no.:
RFF50AF-EYH-DSG:With projected capacitive touch panel

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size (Diagonal) 5 inch
Dot Matrix / Resolution 800 × 3(RGB) × 480 dots
Module Dimension 138.7 (W) × 75.8 (H) × 12.8(D)(MAX) mm
View Area 111.7 × 65.91 mm
Active Area 108 × 64.8 mm
Dot / Pixel Pitch 0.135 × 0.135 mm
LCD Type TFT, Normally Black, Transmissive
View Direction 80/80/80/80
Aspect Ratio 5:3
Backlight Type LED, Normally White
Control-Board Yes
Built-in Controller BT816Q
Interface SPI/QSPI
Touch Panel Resistive Touch Screen (RTP)
Surface Anti-Glare
Brightness 650 cd/㎡
Frame Through Hole Yes
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C
TFT Series Standard TFT LCD, IPS TFT Display

LCM PIN Definition

LCM PIN Definition (CON 5)

Pin Symbol I/O Function
1 VDD P 3.3V power supply input
2 GND P Ground
3 SCK I SPI clock input
4 MISO O SPI Single mode: SPI MISO output
SPI Dual/Quad mode: SPI data line 1
5 MOSI I SPI Single mode: SPI MOSI input
SPI Dual/Quad mode: SPI data line 0
6 CS I SPI slave select input
7 INT OD/O Interrupt to host, open drain output(default) or push-pull output, active low
8 PD_N I Chip power down mode control input, active low. Connect to MCU GPIO for power management or hardware reset function
9 GPIO2 I/O General purpose IO 2
10 GPIO3 I/O General purpose IO 3
11 IO2 I/O SPI Single/Dual mode: General purpose IO 0
SPI Quad mode: SPI data line 2
12 IO3 I/O SPI Single/Dual mode: General purpose IO 1
SPI Quad mode: SPI data line 3
13 NC - No connection
14 NC - No connection
15 NC - No connection
16 NC - No connection
17 VLED P 5V power supply input
18 VLED P 5V power supply input
19 GND P Ground
20 GND P Ground

5 inch 800x480 IPS TFT LCD Display with RTP / Controller Board / BT816Q IC - RFF500F-EYH-DSS

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Operating conditions

Item Symbol Condition Min Typ Max Unit
Supply Voltage For VDD VDD 3.1 3.3 3.5 V
Supply Current For VDD IDD VDD=3.3V 96 144 mA
Supply Voltage For VLED VLED 4.5 5 5.5 V
Supply Current For VLED ILED VLED=+5V 334 500 mA

LED driving conditions

Parameter Symbol Min. Typ. Max. Unit
PWM Control Duty Ratio - 0 - 100 %
PWM Control Frequency - 250 - 10K Hz
LED Life Time - - 50,000 - Hr
Top