5 inch IPS, MIPI Touch Panel Display, Capacitive Touch Panel TFT Display

5 inch IPS, MIPI OCA Capacitive Touch Panel TFT Display

Model No. RF3500D-AYW-MNG1

RF3500D-AYW-MNG1 is a 5-inch, IPS, capacitive touch panel TFT display with a 16:9 aspect ratio and 720×1280 resolution. The module features a wide viewing angle (80/80/80/80) thanks to its IPS panel, one of the most popular techniques on the market.

This capacitive touch panel display uses OCA optical bonding technology, giving it better resistance to impact and vibration and higher brightness, transmittance, and contrast ratio. In addition, this module uses ILI9881C driver IC and supports a 4-lane MIPI interface.

With the low backlight power consumption, RF3500D-AYW-MNG1 provides a brightness of 250 cd/m2 and a contrast ratio of 800: 1 (typical value). The power supply voltage ranges from 2.6~3.6V (the typical value is 3.3V). The module works within the temperatures -20 to +70℃, and the storage temperature covers from -30 to +80℃.

Inquiry or Demo Code

Datasheet

Back

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
TFT Series	Standard TFT LCD, IPS TFT LCD
Size (Diagonal)	5	inch
Dot Matrix / Resolution	720 × 3(RGB) × 1280	dots
Module Dimension	73.3(W) × 127.6(H) × 3.45	mm
Outline Dimension	66.10 × 120.40	mm
Active Area	62.1(W) × 110.4(H)	mm
Dot / Pixel Pitch	0.08625(W) × 0.08625(H)	mm
LCD Type	TFT, Normally Black, Transmissive
View Direction	80/80/80/80 (IPS)
Aspect Ratio	16:9
Backlight Type	LED, Normally White
Control Board	No
TFT Driver IC	ILI9881C or Equivalent
Interface	4-Lanes MIPI DSI
PCAP FW Version	0x5F
PCAP IC	GT928
Detect Points	10	Points
Touch Panel	Projected Capacitive Touch Screen (PCAP) +OCA
Surface	Glare
Brightness	250	cd/㎡
Mounting Hole	No
Operating Temperature	-20~+70	°C
Storage Temperature	-30~+80	°C

LCM PIN Definition

Pin	Symbol	Function
1	NC	No connection
2	NC	No connection
3	NC	No connection
4	NC	No connection
5	NC	No connection
6	NC	No connection
7	NC	No connection
8	NC	No connection
9	NC	No connection
10-11	VCI	Power supply for analog circuits. Connect to an external power supply of 2.5V to 3.6V
12-13	NC	No connection
14	RESET	The external reset input Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power. Fix to VDDI level when not in use.
15	TE	Tearing effect output pin. Leave the pin open when not in use.
16	NC	No connection
17-18	GND	Power ground
19-20	IOVCC	Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V
21	GND	Power ground
22	D3P	MIPI DSI differential data pair. (Data lane 3)
23	D3N	MIPI DSI differential data pair. (Data lane 3)
24	GND	Power ground
25	D2P	MIPI DSI differential data pair. (Data lane 2)
26	D2N	MIPI DSI differential data pair. (Data lane 2)
27	GND	Power ground
28	CLKP	MIPI DSI differential clock pair
29	CLKN	MIPI DSI differential clock pair
30	GND	Power ground
31	D1P	MIPI DSI differential data pair. (Data lane 1)
32	D1N	MIPI DSI differential data pair. (Data lane 1)
33	GND	Power ground
34	D0P	MIPI DSI differential data pair. (Data lane 0)
35	D0N	MIPI DSI differential data pair. (Data lane 0)
36-37	GND	Power ground
38	LED+	Power for LED backlight anode
39	LED1-	Power for LED1 backlight cathode
40	LED2-	Power for LED2 backlight cathode

PCAP PIN Definition

Pin	Symbol	Function
1	SDA	I2C data input and output
2	SCL	I2C clock input
3	RST	External Reset, Low is active
4	INT	External interrupt to the host
5	VDD	Power Supply : +3.3V
6	GND	Ground for analog circuit

5 inch IPS, MIPI Touch Panel Display, Capacitive Touch Panel - RF3500D-AYW-MNG1

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Typical Operation Conditions

Item	Symbol	Values			Unit
Item	Symbol	Min	Typ	Max	Unit
Power supply for analog circuit	VCI	2.5	3.3	3.6	V
Power supply for logic circuit	IOVCC	1.65	1.8	3.6	V
Supply Voltage For Touch Logic	VDDT	2.8	-	3.3	V
Current for Driver	IDD	-	44	-	mA