- General Specs
- Interface Pin Function
- Contour Drawing
- Absolute Maximum Ratings
- Electrical Characteristics
Item | Dimension | Unit |
---|---|---|
Size | 5 | inch |
Dot Matrix (Resolution) | 800× 3(RGB) × 480 | dots |
Module Dimension | 147.0(W) × 104.0(H) × 4.8(D) | mm |
Outline Dimension | 120.7 × 75.8 | mm |
View Area | 109 × 65.8 | mm |
Active Area | 108(W) × 64.8 (H) | mm |
Dot Pitch | 0.135(W) × 0.135(H) | mm |
LCD Type | TFT, Normally White, Transmissive | |
View Direction | 12 o’clock | |
Gray Scale Inversion Direction | 6 o’clock | |
Aspect Ratio | 16:9 | |
Backlight Type | LED, Normally White | |
Control-Board | No | |
Built-in Controller | -- | |
TFT Driver IC | ILI6122 + ILI5960 | |
PCAP FW Version | V 6. 0. 0. 0. 5.28.0.1 | |
PCAP IC | ILI2511 | |
PCAP Interface | USB (I2C available) | |
Interface | 24-bit RGB | |
Touch Panel | Projected Capacitive Touch Screen, PCAP | |
Detect Points | 10 | Finger |
Surface | Glare | |
Brightness | 400 | cd/㎡ |
Frame Through Hole | No | |
Operating Temperature | -20~70 | °C |
Storage Temperature | -30~80 | °C |
TFT Series | Standard TFT LCD |
LCM PIN Definition
FPC Connector is used for the module electronics interface. The recommended model is FH19SC-40S-0.5SH manufactured by HIROSE.
Pin | Symbol | Function |
---|---|---|
1 | VLED- | Power for LED backlight (Cathode) |
2 | VLED+ | Power for LED backlight (Anode) |
3 | GND | Power Ground |
4 | VDD | Power voltage |
5 | R0 | Red data (LSB) |
6 | R1 | Red data |
7 | R2 | Red data |
8 | R3 | Red data |
9 | R4 | Red data |
10 | R5 | Red data |
11 | R6 | Red data |
12 | R7 | Red data(MSB) |
13 | G0 | Green data(LSB) |
14 | G1 | Green data |
15 | G2 | Green data |
16 | G3 | Green data |
17 | G4 | Green data |
18 | G5 | Green data |
19 | G6 | Green data |
20 | G7 | Green data(MSB) |
21 | B0 | Blue data(LSB) |
22 | B1 | Blue data |
23 | B2 | Blue data |
24 | B3 | Blue data |
25 | B4 | Blue data |
26 | B5 | Blue data |
27 | B6 | Blue data |
28 | B7 | Blue data(MSB) |
29 | GND | Power Ground |
30 | CLK | Sample clock |
31 | DISP | Display on/off |
32 | NC/HS | No connection /Horizontal sync input |
33 | NC/VS | No connection /Vertical sync input |
34 | DE | Data input enable |
35 | NC | No connection |
36 | GND | Power Ground |
37 | NC | No connection |
38 | NC | No connection |
39 | NC | No connection |
40 | NC | No connection |
PCAP PIN Definition
Pin | Symbol | Function |
---|---|---|
1 | USB_VSS | System ground |
2 | USB_VDD 5V | Power supply |
3 | USB_D+ | Data + |
4 | USB_D- | Data - |
5 | VSS | System ground |
6 | SDA | I2C data input and output |
7 | SCL | I2C clock input |
8 | RST | External Reset, Low is active |
9 | INT | External interrupt to the host |
10 | VDDT 3.3 | Power supply |
Item | Symbol | Min | Typ | Max | Unit |
---|---|---|---|---|---|
Operating Temperature | TOP | -20 | - | +70 | ℃ |
Storage Temperature | TST | -30 | - | +80 | ℃ |
Typical Operation Conditions
Item | Symbol | Values | Unit | ||
---|---|---|---|---|---|
Min. | Typ. | Max. | |||
Power voltage | VDD | 3.0 | 3.3 | 3.6 | V |
Current for Driver(Black) | IDD | - | 110 | 170 | mA |
Input logic high voltage | VIH | 0.7 VDD | - | VDD | V |
Input logic low voltage | VIL | 0 | - | 0.3 VDD | |
Supply Voltage For Touch Logic | VDDT | 4.4 | 5.0 | 5.5 | V |
Backlight Driving Conditions
Item | Symbol | Values | Unit | ||
---|---|---|---|---|---|
Min. | Typ. | Max. | |||
Voltage for LED backlight | VL | 18 | 19.2 | 20 | V |
Current for LED backlight | IL | -- | 60 | -- | mA |
LED life time | - | -- | 50,000 | - | Hr |