1024x600 IPS, TFT LCD Display 7 inch 1024x600 IPS with MIPI Interface

Model No. RFH700A8-AYH-MNN

RFH700A8-AYH-MNN is a 7" TFT LCD display module. Its resolution is 1024x600 pixels with aspect ratio 16:9. The module features wide viewing angle thanks to the IPS panel which is one of the most popular techniques on the market now. This TFT module adopts driver IC EK79007AD3 + EK73217BCGA supporting 4-Lanes MIPI interface. It also features wide viewing angle and high brightness, providing brightness 1100 cd/m2, contrast ratio (typical value) 800:1. Operating temperature covers from -20~+70℃, storage temperature range is from -30~+80℃. This design is a good fit for industrial application, medical equipment, home appliances, etc.

Related products no.:
RFH70BA8-AYH-MNG: With Projected Capacitive Touch Screen
RFH700A8-AYH-MNS: With Resistive Touch Screen

Inquiry or Demo Code

Datasheet

Back

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
Size (Diagonal)	7	inch
Dot Matrix / Resolution	1024 × RGB × 600(TFT)	dots
Module Dimension	169.9(W) × 103.4(H) × 5.6(D)	mm
Viewing Area	157.2 × 89.43	mm
Active Area	154.2144 × 85.92	mm
Dot / Pixel Pitch	0.1506 × 0.1432	mm
LCD Type	TFT, Normally Black, Transmissive
Viewing Angle	85/85/85/85(IPS)
Aspect Ratio	16:9
Backlight Type	LED, Normally White
Control Board	No
TFT Driver IC	EK79007AD3 + EK73217BCGA or equivalent
Interface	4-Lanes MIPI
Touch Panel	Without Touch Panel
Surface	Anti-Glare
Brightness	1100	cd/㎡
O-Film	No
Mounting Hole	No
Operating Temperature	-20~+70	°C
Storage Temperature	-30~+80	°C
TFT Series	High Brightness TFT LCD, IPS TFT LCD

LCM PIN Definition

Pin No.	Symbol	Function
1	VLED+	LED Anode
2	VLED+	LED Anode
3	VGH	Positive power for TFT
4	VGL	Negative power for TFT
5	UPDN	Gate up or down scan control. UPDN = ”L”, STV2 output vertical start pulse and UD pin output logical “L” to Gate driver. (default) UPDN = ”H”, STV1 output vertical start pulse and UD pin output logical “H” to Gate driver
6	SHLR	Source right or left sequence control. SHLR = ”L“, shift left: last data = S1←S2←S3….......←S1536 = first data. SHLR = ”H“, shift right: first data = S1→S2→S3….....→S1536 = last data.(default)
7	VLED-	LED Cathode
8	VLED-	LED Cathode
9	AVDD	Power for Analog Circuit
10	GND	Ground
11	D3P	MIPI data input.
12	D3N	MIPI data input.
13	GND	Ground
14	D2P	MIPI data input.
15	D2N	MIPI data input.
16	GND	Ground
17	CLKP	MIPI clock input
18	CLKN	MIPI clock input
19	GND	Ground
20	D1P	MIPI data input.
21	D1N	MIPI data input.
22	GND	Ground
23	D0P	MIPI data input.
24	D0N	MIPI data input.
25	GND	Ground
26	STBYB	Standby mode. STBYB = ”H“,normal operation(default) STBYB = ”L”, timing controller, source driver will turn off, all output are GND.
27	RESET	Global reset pin. Active Low to enter Reset State. Normally pull high. Connecting with an RC reset circuit for stability.
28	VDD(1.8V)	Digital circuit
29	VDD(1.8V)	Digital circuit
30	VCOMIN	Common voltage

Note:
When L/R=”0”,set right to left scan direction.
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.

1024x600 IPS, LCD Display 7 inch 1024x600, LCD Display 7 inch 1024x600 IPS with MIPI Interface

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Typical Operation Conditions

Item	Symbol	Values			Unit
Item	Symbol	Min.	Typ.	Max.	Unit
Power voltage	VDD	1.71	1.8	1.89	V
Analog Power	AVDD	8.9	9.0	9.1	V
TFT Gate ON Voltage	VGH	17	18	19	V
TFT Gate OFF Voltage	VGL	-6.5	-6.0	-5.5	V
TFT Common Voltage	VCOMIN	3.0	3.15	3.3	V
Current for Driver	IDD	--	16	24	mA
Power Current	IAVDD	--	19	28.5	mA
TFT Gate ON Current	IVGH	--	1.6	2.4	mA
TFT Gate OFF Current	IVGL	--	0.6	0.9	mA
TFT Common Current	IVCOMIN	--	0	--	mA