RFF700C4-AIH-DNG

7 inch High Brightness TFT Display with PCAP

Model No. RFF700C4-AIH-DNG

RFF700C4-AIH-DNG is a 7-inch TFT display module with capacitive touch panel, resolution 800x480 pixels. Support 18-bit RGB interface. The contrast ratio of the module is 1000:1 (typical value), the brightness is 800 nits (typical value), and the aspect ratio is 16:9.

The PCAP touchscreen has a built-in IC ILI2130 which enables 5-points touch, supports I2C interface. Supply voltage for logic ranges from 3V-3.6V, typical value is 3.3V. It works within temperature range from -20 to +70℃, storage temperature ranges from -30 to +80℃.

Inquiry or Demo Code

Datasheet

Back

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
TFT Series	High Brightness TFT LCD
Size (Diagonal)	7	inch
Dot Matrix / Resolution	800 × RGB × 480 (TFT)	dots
Module Dimension	165.0(W) × 104.6(H) × 10.2(MAX)(D)	mm
Active Area	152.4 × 91.44	mm
Dot / Pixel Pitch	0.1905 × 0.1905	mm
LCD Type	TFT, Normally White, Transmissive
View Direction	12 o’clock
Gray Scale Inversion Direction	6 o’clock
Aspect Ratio	16:9
Backlight Type	LED, Normally White
Control Board	No
TFT Driver IC	EK9713B+EK73202A or equivalent
Interface	18-bit RGB
PCAP FW Version	0x07.0x00.0x00.0x00.0x70.0x44.0x0A.0x02
PCAP IC	ILI2130
PCAP Interface	I2C
PCAP Resolution	16384 × 16384
Detect Points	5	Points
Touch Panel	Projected Capacitive Touch Panel, PCAP
Surface	Glare
Brightness	800	cd/㎡
Mounting Hole	No
Operating Temperature	-20~+70	°C
Storage Temperature	-30~+80	°C

LCM PIN Definition

Pin	Symbol	Function
1	GND	Power Ground
2	GND	Power Ground
3	NC	Not Connect
4	Vcc	Power Supply for Digital Circuit
5	Vcc	Power Supply for Digital Circuit
6	Vcc	Power Supply for Digital Circuit
7	Vcc	Power Supply for Digital Circuit
8	NC	Not Connect
9	DE	Data Enable
10	GND	Power Ground
11	GND	Power Ground
12	GND	Power Ground
13	B5	Blue Data 5 (MSB)
14	B4	Blue Data 4
15	B3	Blue Data 3
16	GND	Power Ground
17	B2	Blue Data 2
18	B1	Blue Data 1
19	B0	Blue Data 0 (LSB)
20	GND	Power Ground
21	G5	Green Data 5 (MSB)
22	G4	Green Data 4
23	G3	Green Data 3
24	GND	Power Ground
25	G2	Green Data 2
26	G1	Green Data 1
27	G0	Green Data 0(LSB)
28	GND	Power Ground
29	R5	Red Data 5 (MSB)
30	R4	Red Data 4
31	R3	Red Data 3
32	GND	Power Ground
33	R2	Red Data 2
34	R1	Red Data 1
35	R0	Red Data 0(LSB)
36	GND	Power Ground
37	GND	Power Ground
38	DCLK	Clock Signals ; Latch Data at the Falling Edge (CLK)
39	GND	Power Ground
40	GND	Power Ground

Backlight Driving Part

Pin No.	Symbol	Description
1	VLED+	Red, LED_ Anode
2	VLED-	White, LED_ Cathode

PCAP PIN Definition

Pin	Symbol	Function
1	VSS	Ground for analog circuit
2	VDDT	Power Supply : +3.3V
3	SCL	I2C clock input
4	NC	No connect
5	SDA	I2C data input and output
6	NC	No connect
7	/RST	External Reset, Low is active
8	NC	No connect
9	/INT	External interrupt to the host
10	VSS	Ground for analog circuit