7 inch 1024x600 High Brightness IPS LVDS TFT Display with Capacitive Touch - RFH700A8-AYH-LNG
7 inch 1024x600 High Brightness IPS LVDS TFT Display with Capacitive Touch - RFH700A8-AYH-LNG
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Size (Diagonal) 7 inch
Dot Matrix / Resolution 1024 × RGB × 600(TFT) dots
Module Dimension 169.9(W) × 103.4(H) × 7.275(D) mm
View Area 156.08 × 87.92 mm
Active Area 154.2144 × 85.92 mm
Dot / Pixel Pitch 0.1506 × 0.1432 mm
LCD Type TFT, Normally Black, Transmissive
View Direction IPS
Viewing Angle 85/85/85/85
Aspect Ratio 16:9
Backlight Type LED, Normally White
Control-Board No
TFT Driver IC ST5021 + ST5651 or equivalent
PCAP FW Version V03
PCAP IC FT5426 or Equivalent
PCAP Interface I2C
Interface LVDS
Touch Panel Projected Capacitive Touch Panel, PCAP
Surface Glare
Brightness 850 cd/㎡
O-Film No
Frame Through Hole No
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C
TFT Series LVDS TFT LCD / IPS TFT LCD / High Brightness TFT Display

LCM PIN Definition

Pin No. Symbol I/O Function
1 VCOM P Common Voltage
2 VDD P Digital circuit
3 VDD P Digital circuit
4 NC --- No connection
5 RESET I Global reset pin
6 STBYB   I Standby mode, Normally pulled high
STBYB = “1”, normal operation
STBYB = “0”, timing controller, source driver will turn off, all output are High-Z
7 GND P Ground
8 RXIN0- I Negative LVDS differential data input
9 RXIN0+ I Positive LVDS differential data input
10 GND P Ground
11 RXIN1- I Negative LVDS differential data input
12 RXIN1+ I Positive LVDS differential data input
13 GND P Ground
14 RXIN2- I Negative LVDS differential data input
15 RXIN2+ I Positive LVDS differential data input
16 GND P Ground
17 RXCLKIN- I Negative LVDS differential clock input
18 RXCLKIN+ I Positive LVDS differential clock input
19 GND P Ground
20 RXIN3- I Negative LVDS differential data input
21 RXIN3+ I Positive LVDS differential data input
22 GND P Ground
23 NC --- No connection
24 NC --- No connection
25 GND P Ground
26 NC --- No connection
27 NC --- No connection
28 SELB I 6bit/8bit mode select
H:6bit / L:8bit
29 AVDD P Power for Analog Circuit
30 GND P Ground
31 LED- P LED Cathode
32 LED- P LED Cathode
33 L/R I Horizontal inversion
34 U/D I Vertical inversion
35 VGL P Negative power for TFT
36 NC --- No connection
37 NC --- No connection
38 VGH P Positive power for TFT
39 LED+ P LED Anode
40 LED+ P LED Anode

I:input, O:output, P:power

PCAP PIN Definition

Pin Symbol Function
1 VSS Ground for analog circuit
2 VDDT Power Supply : +3.0V
3 SCL I2C clock inputI2C clock input
4 NC No connect
5 SDA I2C data input and output
6 NC No connect
7 /RST External Reset, Low is active
8 NC No connect
9 /INT External interrupt to the host
10 VSS Ground for analog circuit

7 inch 1024x600 High Brightness IPS LVDS TFT Display with Capacitive Touch - RFH700A8-AYH-LNG

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Typical Operation Conditions

Item Symbol Values Unit
Min. Typ. Max.
Power voltage VDD 3.0 3.3 3.6 V
Analog Power AVDD 8.9 9.0 9.1 V
TFT Gate ON Voltage VGH 17 18 19 V
TFT Gate OFF Voltage VGL -6.5 -6.0 -5.5 V
TFT Common Voltage Vcom 3.0 3.15 3.3 V
Current for Driver IDD - 14 21 mA

Current Consumption

Item Symbol Values Unit
Min. Typ. Max.
Current for Driver IGH - 1.0 - mA
IGL - 1.0 - mA
Icom - 1.0 - mA
IAVDD - 25.0 - mA

Backlight Driving Conditions

Item Symbol Values Unit
Min. Typ. Max.
Voltage for LED backlight VL 16.8 19.2 21.0 V
Current for LED backlight IL -- 290 -- mA
LED life time - - 50,000 - Hr
Top