RFF80BQ-1IW-DBN - 8-inch TFT LCD Module with Controller Board - Raystar

8-inch 800x480 TFT LCD Module with Controller Board (SSD1963 IC)

Model No. RFF80BQ-1IW-DBN

RFF80BQ-1IW-DBN is one of the models in our Q series--- 8-inch TFT-LCD display module with controller board. The resolution of this module is 800 x 480 pixels. The Q series mainly uses IC SSD1963. TFT modules of this series are all characterized by 36-pin MCU 8080 8/16-bit pin define, and the 8/16-bit 6800 pin define interface can be selected through Jump. Compared to the P series, functions of Q series are simple and pricing is relatively lower.

The brightness is 420 cd/m2 with contrast ratio 500:1. LCM voltage ranges from 3.0V-3.3V, typical value is 3.1V. Operating temperature covers from -20~+70℃, storage temperature range is from -30~+80℃.

If you need any technical support or product quotes regarding the RFF80BQ-1IW-DBN, please feel free to contact our sales team!

Inquiry or Demo Code Datasheet Back Previous Next

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
TFT Series	TFT Panel with Controller Board
Size (Diagonal)	8	inch
Dot Matrix / Resolution	800 × RGB × 480 (TFT)	dots
Module Dimension	192.8(W) × 116.9(H) × 12.1(D)	mm
Active Area	176.64 × 99.36	mm
Dot / Pixel Pitch	0.2208 × 0.2070	mm
LCD Type	TFT, Normally White ,Transmissive
View Direction	12 o’clock
Gray Scale Inversion Direction	6 o’clock
Aspect Ratio	16:9
Backlight Type	LED, Normally White
Control Board	Yes
Power Board	Yes
Built-in Controller	SSD1963
Interface	Digital 8080 family MPU 8bit/16bit
Touch Panel	Without Touch Panel
Surface	Anti-Glare
Brightness	420	cd/㎡
O-Film	No
Operating Temperature	-20~+70	°C
Storage Temperature	-30~+80	°C

LCM PIN Definition (CON3)

Pin	Symbol	Function
1	GND	System ground pin of the IC . Connect to system ground.
2	VDD	Power Supply : +3.3V
3	BLE	Backlight control signal , H: On \ L: Off
4	D/C	Data/Command select
5	WR	Write strobe signal
6	RD	Read strobe signal
7	DB0	Data bus
8	DB1	Data bus
9	DB2	Data bus
10	DB3	Data bus
11	DB4	Data bus
12	DB5	Data bus
13	DB6	Data bus
14	DB7	Data bus
15	DB8	Data bus (When select 8bits Mode, this pin is NC)
16	DB9	Data bus (When select 8bits Mode, this pin is NC)
17	DB10	Data bus (When select 8bits Mode, this pin is NC)
18	DB11	Data bus (When select 8bits Mode, this pin is NC)
19	DB12	Data bus (When select 8bits Mode, this pin is NC)
20	DB13	Data bus (When select 8bits Mode, this pin is NC)
21	DB14	Data bus (When select 8bits Mode, this pin is NC)
22	DB15	Data bus (When select 8bits Mode, this pin is NC)
23	NC	No connect
24	NC	No connect
25	CS	Chip select
26	RESET	Hardware reset
27	L/R	Left / right selection; Default L/R=H
28	U/D	Up/down selection; ; Default U/D=L
29	NC	No connect
30	NC	No connect
31	NC	No connect
32	NC	No connect
33	VLED-	Power for LED Driver IC(GND)
34	VLED-	Power for LED Driver IC(GND)
35	VLED+	Power for LED Driver IC(+5V)
36	VLED+	Power for LED Driver IC(+5V)

RFF80BQ-1IW-DBN Contour Drawing - 8-inch TFT LCD Module with Controller Board - Raystar

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Operating Conditions (CON3.Pin1=GND, Pin2=VDD)

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For LCM	VDD	－	3.0	3.1	3.3	V
Supply Current For LCM	IDD	－	－	120	180	mA

Backlight Driving Conditions (CON3.Pin1=GND, Pin2=VDD)

Parameter	Symbol	Min	Typ	Max	Unit
Operation Current For LED Driver	VLED=5V	－	480	720	mA
Power Consumption	VLED=5V	－	2400	3600	mW
Supply Voltage For LED Driver	VLED+	－	5	－	V
LED Life Time	－	－	20,000	－	Hr