- General Specs
- Interface Pin Function
- Contour Drawing
- Absolute Maximum Ratings
- Electrical Characteristics
| Item | Dimension | Unit |
|---|---|---|
| TFT Series | IPS TFT LCD,LVDS TFT Display,Wide Temperature TFT,Wide View TFT,High Brightness TFT | |
| Size (Diagonal) | 8.4 | inch |
| Dot Matrix / Resolution | 1024 × 3 (BGR) × 768 | dots |
| Module Dimension | 199.5 × 149.0 × 11.5 | mm |
| Active Area | 170.8032 (H) × 128.1024 (V) | mm |
| Dot / Pixel Pitch | 0.1668 × 0.1668 | mm |
| LCD Type | Normally Black , Transmissive | |
| View Direction | 80/80/80/80 (IPS) | |
| Aspect Ratio | 4:3 | |
| Side screw torque | Typ:0.9 Max:1.3 (Unit,Kgf-cm) | |
| Backlight Type | LED, Normally White | |
| Control Board | No | |
| Power Board | No | |
| IC | ST5821AH+ST5084AA | |
| Interface | LVDS | |
| Touch Panel | Without Touch Panel | |
| Surface | Anti-Glare | |
| Brightness | 1000 | cd/㎡ |
| O-Film | No | |
| Operating Temperature | -30~+80 | °C |
| Storage Temperature | -30~+80 | °C |
LCM PIN Definition
| Pin No. | Symbol | Function |
|---|---|---|
| 1 | VDD | Power supply |
| 2 | VDD | Power supply |
| 3 | GND | Ground |
| 4 | GND | Ground |
| 5 | Link0- | LVDS differential data input (D0N) |
| 6 | Link0+ | 0+ LVDS differential data input (D0P) |
| 7 | GND | Ground |
| 8 | Link1- | LVDS differential data input (D1N) |
| 9 | Link1+ | 1+ LVDS differential data input (D1P) |
| 10 | GND | Ground |
| 11 | Link2- | 2- LVDS differential data input (D2N) |
| 12 | Link2+ | 2+ LVDS differential data input (D2P) |
| 13 | GND | Ground |
| 14 | CLKIN- | - LVDS differential clock input (CLKN) |
| 15 | CLKIN+ | + LVDS differential clock input (CLKP) |
| 16 | GND | Ground |
| 17 | Link3- | 3- LVDS differential data input (D3N) |
| 18 | Link3+ | 3+ LVDS differential data input (D3P) |
| 19 | MODE | Bit 6/8:Low(6 Bit);High(8 Bit) |
| 20 | SC | Scan direction selector (Low: Normal ;High: Reverse) |
CN2
| Pin No. | Symbol | Function |
|---|---|---|
| 1 | LED C3 | LED_ Cathode 3 |
| 2 | LED A3 | LED_ Anode 3 |
| 3 | LED C1 | LED_ Cathode 1 |
| 4 | LED A1 | LED_ Anode 1 |
| 5 | LED A2 | LED_ Anode 2 |
| 6 | LED C2 | LED_ Cathode 2 |
| Item | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Operating Temperature | TOP | -30 | － | +80 | ℃ |
| Storage Temperature | TST | -30 | － | +80 | ℃ |
Operating Conditions
| Item | Symbol | Min | Typ | Max | Unit | |
|---|---|---|---|---|---|---|
| Supply Voltage For Logic | VDD | 3.0 | 3.3 | 3.6 | V | |
| Power Supply For Current | VDD=3.3V | － | 330 | 495 | mA | |
| Input Voltage | H level | VIH | 0.7VDD | － | VDD | V |
| L Level | VIL | GND | － | 0.3VDD | V | |
Backlight Characteristics
| Parameter | Symbol | Min. | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage of White LED Backlight | VLED | 24.0 | 36 | 27.2 | V |
| Current for LED Backlight | ILED | － | 90*3 | － | mA |
| LED Life Time | － | － | 100,000 | － | Hr |
