8 inch Vertical 800x1280 MIPI IPS TFT LCD Module with RTP - RFU800G-AYH-MNS
8 inch Vertical 800x1280 MIPI IPS TFT LCD Module with RTP - RFU800G-AYH-MNS

8 inch Vertical 800x1280 MIPI IPS TFT LCD Module with RTP

Model No. RFU800G-AYH-MNS

RFU800G-AYH-MNS is a 8 inch, IPS TFT LCD module with Resistive Touch Screen. The module dimension is 115.74x 184.93mm, and the active area is 107.64x172.224 mm. This 800x1280 TFT LCD uses an ILI9881C IC supporting MIPI interfaces. With the IPS technique, the display allows viewers to view the screen from wider viewing angles (85/85/85/85 degrees).

Operating with a supply voltage range of 3.0V to 3.6V (typical value:3.3V), this LCD module is highly versatile. It can operate at temperatures from -20°C to +70°C; its storage temperature ranges from -30°C to +80°C. This design is well-suited for a variety of applications, including vending machines, ship monitoring controllers, security monitors, and smart home systems, etc.

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
TFT Series IPS TFT LCD, Wide View TFT, Resistive Touch Screen
Size (Diagonal) 8 inch
Dot Matrix / Resolution 800 × 3(RGB) × 1280 dots
Module Dimension 115.74 × 184.93 × 7.35 mm
Active Area 107.64 × 172.224 mm
Dot / Pixel Pitch 0.13455 × 0.13455 mm
LCD Type TFT, Normally Black, Transmissive
View Direction 85/85/85/85 (IPS)
Aspect Ratio 10:16
Backlight Type LED, Normally White
Control Board No
TFT Driver IC ILI9881C
Interface 4-Lanes MIPI
Touch Panel Resistive Touch Panel (RTP)
Surface Anti-Glare
Brightness 750 cd/㎡
Mounting Hole No
Operating Temperature -20~+70 °C
Storage Temperature -30~+80 °C

LCM PIN Definition

Pin Symbol Function
1-5 NC No connection
6 YU Top electrode
7 XL Left electrode
8 YD Bottom electrode
9 XR Right electrode
10-11 VCI Power supply for analog circuits. Connect to an external power supply of 3.0V to 3.6V
12-13 NC No connection
14 RESET The external reset input (RESX)
Initializes the chip with a low input. Be sure to execute a power-on reset after supplying power.
Fix to IOVCC level when not in use.
15 TE Tearing effect output pin.
Leave the pin open when not in use.
16 NC No connection (LED PWM)
17-18 GND Power ground
19-20 IOVCC Power supply for analog circuits. Connect to an external power supply of 1.65V to 3.6V
21 GND Power ground
22 D3P MIPI DSI differential data pair. (Data lane 3)
23 D3N
24 GND Power ground
25 D2P MIPI DSI differential data pair. (Data lane 2)
26 D2N
27 GND Power ground
28 CLKP MIPI DSI differential clock pair
29 CLKN
30 GND Power ground
31 D1P MIPI DSI differential data pair. (Data lane 1)
32 D1N
33 GND Power ground
34 D0P MIPI DSI differential data pair. (Data lane 0)
35 D0N
36 GND Power ground
37 VLED1+ Power for LED1 backlight anode
38 VLED2+ Power for LED2 backlight anode
39 VLED1- Power for LED1 backlight cathode
40 VLED2- Power for LED2 backlight cathode

8 inch Vertical 800x1280 MIPI IPS TFT LCD Module with RTP - RFU800G-AYH-MNS

Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

Typical Operation Conditions:

Item Symbol Values Unit
Min. Typ. Max.
Power supply for analog circuit VCI 3.0 3.3 3.6 V
Power supply for logic circuit IOVCC 1.65 1.8 3.6 V
Current for Driver  IVCI - 45 70 mA
I IOVCC - 20 30 mA

Backlight Driving Conditions:

Parameter Symbol Min. Typ Max Unit
LED current for VLED1+ ILED1 - 240 - mA
LED voltage for VLED1+ VLED1 8.1 9.0 10.2 V
LED current for VLED2+ ILED2 - 240 - mA
LED voltage for VLED2+ VLED2 8.1 9.0 10.2 V
LED Life Time   - 50,000 - Hr
Top