16x2 ST7032Ai Character COG LCD Display - RX1602L

16x2 ST7032Ai Character COG LCD Display

Model No. RX1602L

RX1602L is an alternative series for RX1602A4 in response to Sitronix’ reduced production of chips. RX1602L is a 16 Characters × 2 Lines COG LCD display with backlight. Module dimension is 62.8×23.0 mm; active area is 47.6×9.74 mm. There’s a built-in controller IC ST7032Ai supporting I2C serial interface. Logic power supply ranges from 2.9V-3.1V (Typical 3V). Operating temperature is between -20°C to +70°C; storage temperature covers from -30°C to +80°C. Feel free to contact us for various combinations of LED backlight and LCD colors.

Data source ref: RX1602L-FHW-TS

Inquiry or Demo Code Datasheet Back Previous Next

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
Structure	COG
Size (Diagonal)	1.91	inch
Dot Matrix / Resolution	5×8 dots includes cursor	dots
Characters × Lines	16 Characters × 2 Lines
Module Dimension	62.8 × 23.0 × 6.3	mm
Viewing Area	51.5 × 12.23	mm
Active Area	47.6 × 9.74	mm
Dot / Pixel Size	0.48 × 0.54	mm
Dot / Pixel Pitch	0.53 × 0.59	mm
Character Size	2.60 × 4.67	mm
Character Pitch	3.00 × 5.07	mm
IC	ST7032Ai
Interface	I2C
Power Supply	3V
Duty	1/16 duty, 1/5 Bias
Type	Character LCD Display

Pin No.	Symbol	Description
1	VG	VG is the LCD driving voltage for segment circuits. VGO is the output of VG regulator. VGS is the feedback of VG regulator. VGI is the VG input of segment circuits. 1.6 ≤ VG < VDD2.
2	XV0	XV0 is the LCD driving voltage for common circuits at positive frame. XV0OUT is the output of XV0 regulator. XV0S is the feedback of XV0 regulator. XV0I is the V0 input of common circuits.
3	V0	V0 is the LCD driving voltage for common circuits at negative frame. V0OUT is the output of V0 regulator. V0S is the feedback of V0 regulator. V0I is the V0 input of common circuits. Be sure that: V0 ≥ VG > VM > VSS ≥ XV0 (under operation).
4	VDD	Power supply input.
5	VSS	Ground
6	SDA	Serial data input
7	SCL	Serial clock input
8	RST	Hardware reset input pin. When RSTB is “L”, internal initialization is executed and the internal registers will be initialized

16x2 ST7032Ai Character COG LCD Display - RX1602L

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃
Input Voltage	VIN	-0.3	－	VDD+0.3	V
Power Supply Voltage	VDD-VSS	-0.3	－	+4.0	V
LCD Driver Voltage	VLCD	-0.3	－	7.0	V

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For Logic	VDD-VSS	－	2.9	3.0	3.1	V
Supply Voltage For LCD	VOP	Ta=-20℃ Ta=25℃ Ta=70℃	－ 4.3 －	－ 4.5 －	－ 4.7 －	V V V
Input High Volt.	VIH	－	0.7 VDD	－	VDD	V
Input Low Volt.	VIL	－	VSS	－	0.3VDD	V
Supply Current (LED backlight is not included)	IDD	－	－	0.2	0.5	mA