- 一般規格
- Pin功能定義
- 規格圖
- 最大絕對額定值
- 電氣特性
項目 | 規格內容 | 單位 |
---|---|---|
對角線尺寸 | 10.1 | 吋 |
點陣/解析度 | 1024 × RGB × 600 | dots |
模組尺寸 | 235(W) × 143(H) × 8.78(D) | mm |
可視區域 (VA) | 223.72 × 126.28 | mm |
有效區域 (AA) | 222.72 × 125.28 | mm |
點(像素)間距 | 0.2175 × 0.2088 | mm |
LCD 類型 | TFT, Normally Black, Transmissive | |
視角 | IPS | |
可視角度 | 85/85/85/85 | |
長寬比 | 16:9 | |
背光類型 | LED, 白色 | |
控制板 | 無 | |
TFT 驅動IC | EK79001HN + EK73215BCGA 或相容IC | |
介面 | LVDS | |
PCAP FW 版本 | V6.0.0.0.62.90.1.2 | |
PCAP IC | ILI2511 或相容IC | |
PCAP介面 | USB (I2C可用) | |
支援指數 | 5 | 指 |
觸控面板 | 投射電容式觸控面板(PCAP) | |
表面 | 亮面 | |
亮度 | 900 | cd/㎡ |
鐵框螺絲孔 | 無 | |
工作溫度 | -20~+70 | °C |
儲存溫度 | -30~+80 | °C |
TFT系列 | 高亮度TFT, IPS TFT, LVDS TFT |
TFT LCD 模組
Pin No. | 符號 | 功能說明 |
---|---|---|
1 | VCOM | Common voltage |
2 | VDD | Digital power |
3 | VDD | Digital power |
4 | NC | Not connect |
5 | Reset | Global reset pin. Active low to enter reset state. Suggest to connecting with an RC reset circuit for stability. Normally pull high. (R=10KΩ,C=1μF) |
6 | STBYB | Standby mode, normally pull high STBYB=”1”, normal operation STBYB=”0”,timing control, source driver will turn off, all output are high-Z |
7 | GND | Digital ground |
8 | RXIN0- | Negative LVDS differential data inputs |
9 | RXIN0+ | Positive LVDS differential data inputs |
10 | GND | Digital ground |
11 | RXIN1- | Negative LVDS differential data inputs |
12 | RXIN1+ | Positive LVDS differential data inputs |
13 | GND | Digital ground |
14 | RXIN2- | Negative LVDS differential data inputs |
15 | RXIN2+ | Positive LVDS differential data inputs |
16 | GND | Digital ground |
17 | RXCLKN- | Negative LVDS differential clock inputs |
18 | RXCLKN+ | Positive LVDS differential clock inputs |
19 | GND | Digital ground |
20 | RXIN3- | Negative LVDS differential data inputs |
21 | RXIN3+ | Positive LVDS differential data inputs |
22 | GND | Digital ground |
23 | NC | Not connect |
24 | NC | Not connect |
25 | GND | Digital ground |
26 | NC | Not connect |
27 | NC | Not connect |
28 | SELB | 6-bit/8-bit input select SELB = L , 8-bit ; SELB = H , 6-bit |
29 | AVDD | Analog power |
30 | GND | Digital ground |
31 | LED- | LED Cathode |
32 | LED- | LED Cathode |
33 | L/R | Left or right display control |
34 | U/D | Up / down display control |
35 | VGL | Negative power for TFT |
36 | NC | Not connect |
37 | NC | Not connect |
38 | VGH | Positive power for TFT |
39 | LED+ | LED Anode |
40 | LED+ | LED Anode |
When L/R=”0”,set right to left scan direction.
When L/R=”1”,set left to right scan direction.
When U/D=”0”,set top to bottom scan direction.
When U/D=”1”,set bottom to top scan direction.
PCAP PIN 定義
Pin | 符號 | 功能說明 |
---|---|---|
1 | USB_VSS | System ground |
2 | USB_VDD 5V | Power supply |
3 | USB_D+ | Data + |
4 | USB_D- | Data - |
5 | VSS | System ground |
6 | SDA | I2C data input and output |
7 | SCL | I2C clock input |
8 | RST | External Reset, Low is active |
9 | INT | External interrupt to the host |
10 | VDDT 3.3 | Power supply |
項目 | 符號 | 最小值 | 典型值 | 最大值 | 單位 |
---|---|---|---|---|---|
工作溫度 | TOP | -20 | - | +70 | ℃ |
儲存溫度 | TST | -30 | - | +80 | ℃ |
典型工作條件 (At Ta = 25 °C,)
項目 | 符號 | 最小值 | 典型值 | 最大值 | 單位 |
---|---|---|---|---|---|
LCD數位電源電壓 | VDD | 3 | 3.3 | 3.6 | V |
類比電源電壓 | AVDD | 9.89 | 10.2 | 10.5 | V |
TFT VGH 電壓 | VGH | 19.4 | 20.0 | 20.6 | V |
TFT VGL 電壓 | VGL | -10.3 | -10.0 | -9.7 | V |
TFT Vcom 電壓 | VCOM | 4.0 | 4.3 | 4.6 | V |
邏輯輸入高電壓 | VIH | 0.7 VDD | - | VDD | V |
邏輯輸入低電壓 | VIL | 0 | - | 0.3 VDD | V |
PCAP電源電壓 | USB_VDD 5V | 4.4 | 5.0 | 5.5 | V |
I VDD 5V | — | 97.8 | 120 | mA |