The RUABAB120V i.MX6 / RUABLB120V i.MX6 is a computer single board based on the NXP i.MX6 embedded System-on-chip (SoC). The SoC features a scalable multi-core ARM Cortex™ A9 processor with one to four corresponding versions. The module delivers high CPU and graphical performance with minimum power consumption.
The RUAB series incorporates DVFS (Dynamic Voltage and Frequency Scaling) and Thermal Throttling which enables the system to adjust operating frequency and voltage continuously. By changing in workload and temperature, it can be adjusted to be the best performance with the lowest power consumption.
The module targets a wide range of applications, including: Digital Signage, Medical Devices, Navigation, Industrial Automation, HMIs, Avionics, Entertainment system, POS, Data Acquisition, Thin Clients, Robotics, Gaming and more.
It offers a wide range of interfaces from simple GPIOs, industry standard I2C, SPI, and UART buses through to high speed USB 2.0 interface and a 16/32bit external memory bus (parallel bus). The RGB and LVDS interface offer users to connect with high resolution displays.
RUABAB120V iMX-6: The RUABAB120V iMX-6 with Android 4.4.2 and Embedded Linux images are also available.
RUABLB120V iMX-6: The RUABLB120V iMX-6 with Linux Yocto Daisy 1.6 images is available.
■NXP Cortex-A9 Dual lite @ 1.0GHz
■On-board DDR3 Up to 1GB & 8GB eMMC NAND Flash
■Support LVDS high solution display、RGB Parallel interface and HDMI(1920*1080)
■Full HD Decoder, 2D/3D, OpenGL ES2.0 or up
■Low power consumption
■Support Android 4.4.2 /Linux yocto Daisy 1.6 (QT Included)
■Support TFT Module from 5.0”~12.1” (Support RGB & LVDS)
■With-WIFI version :WIFI/BT 2-channel CAN Bus included (Optional)
Raystar supports additional Operating Systems. For further information and technical support, please contact us.