5 PCAP TFT LCD with Embedded Motherboard (RGB) - Raystar
5 PCAP TFT LCD with Embedded Motherboard (RGB) - Raystar
5 PCAP TFT LCD with Embedded Motherboard (RGB) - Raystar

5" PCAP TFT LCD with Embedded Motherboard (RGB)

Model No. RUAAAA120V050BWIGX00

Motherboard Feature :

  • Motherboard only
  • NXP Cortex-A9 Dual core 1.0GHz
  • On-board DDR3 Up to 2GB & 8GB eMMC NAND Flash
  • Support LVDS high solution display & RGB interface
  • Low power consumption
  • Support Android 4.2 / Linux
  • Support 5 types TFT Module from 5"~12.1" (Support RGB & LVDS)

Inquiry or Demo Code Datasheet Back
Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Electrical Characteristics
  • Embedded Specs
  • Embedded Drawing
Item Dimension Unit
Size 5 inch
Dot Matrix (Resolution) 800 × 3(RGB) × 480 dots
Module Dimension 120.7(W) × 75.8(H) × 12.1(D) mm
View Area 110.7 × 67.5 mm
Active Area 108.0 (W) × 64.8(H) mm
Dot Pitch 0.135 (W) × 0.135(H) mm
LCD Type TFT, Normally White, Transmissive
View Direction 12 o’clock
Gray Scale Inversion Direction 6 o’clock
Aspect Ratio 16:9
Backlight Type LED, Normally White
Interface RGB 888
Touch Panel Projected Capacitive Touch Panel, PCAP
Surface Glare
Brightness 400 cd/㎡
Power Supply +3.3V power supply of VCC
Operating Temperature -20~70 °C
Storage Temperature -30~80 °C
Feature Motherboard+WF50B+PCAP (w/ RGB Cable)

LCM PIN Definition

Pin Symbol Function
1 VCC Power for Digital Circuit 3.3V
2 PWM Backlight control signal
3 VCC Power for Digital Circuit 3.3V
4 VCC12V Power supply for backlight 12.0V
5 I2C_SCL I2C clock inputI2C clock input
6 DISP0_CLK Sample clock
7 I2C_SDA I2C data input and output
8 GND Power ground
9 GND Power ground
10 DISP0_HSYNC Horizontal Sync Input
11 CTP_INT External interrupt to the host
12 DISP0_VSYNC Vertical Sync Input
13 DISP0_DEN Data Input Enable
14 GND Power ground
15 GND Power ground
16 B0 Blue data
17 G0 Green data
18 B1 Blue data
19 G1 Green data
20 B2 Blue data
21 G2 Green data
22 B3 Blue data
23 G3 Green data
24 B4 Blue data
25 G4 Green data
26 B5 Blue data
27 G5 Green data
28 B6 Blue data
29 G6 Green data
30 B7 Blue data
31 G7 Green data
32 GND Power ground
33 R4 Red data
34 R0 Red data
35 R5 Red data
36 R1 Red data
37 R6 Red data
38 R2 Red data
39 R7 Red data
40 R3 Red data

5 PCAP TFT LCD with Embedded Motherboard (RGB) - Raystar

Operationg conditions

Item Symbol Min Typ Max Unit
Supply Voltage VCC 3 3.3 3.5 V
Supply Current ICC --- 17 25 mA

B/L driving conditions

Parameter Symbol Min Typ Max Unit
LED Voltage VBL+ 17.4 19.8 21 V
LED Current --- 30 40 50 mA
Form Factor
Processor System Cpu NXP Cortex-A9 Dual core 1.0GHz (Quad core is optional)
Technology DDR3 1GB x64 bit at 400MHz
Capacity Onboard DDR3 1GB(2GB Max)
Flash  4GB(8GB Max) eMMC NAND Flash for Advantech boot loader
Graphic LVDS Dual output 24 bit LVDS(1024*600 or 1024*768)
RGB 18-bits/24-bits TTL with DE+H/V sync(800*480)
Graphic engine 3D GPU with 1 shadow
H/W Vodeo codec Support MPEG 1/2/4, H.262 Hardware Decoder.
MIPI Reserved
Ethernet Speed Ethernet 10/100/1000
I/O USB 2 x USB 2.0 Host ;1 x USB 2.0 OTG
2 x pin header
Audio Wolfson (Line out)
Serial port RS232 (1*DB9 ) ; RS485/422/232 (1 * pin header)
SPI 2 (Host, option) 
IIC 2 (Client, option)
Touch 4-wire Resistive type(onboard)/ PCAP is driven IIC interface  
GPIO 16-pin 3.3V TTL Level GPIOs 
Expansion SD Socket 1 * SD Slot
Power Voltage DC12V
Consumption 2.5W
Environment Temperature -10℃~60℃/ -20℃~70℃
Dimension Motherboard  114mm * 95mm * 20mm

Embedded Motherboards, Embedded Board, Single Board, Embedded System Board - Raystar

Top