10.1 RTP TFT LCD with Embedded System Board (LVDS) - Raystar
10.1 RTP TFT LCD with Embedded System Board (LVDS) - Raystar
10.1 RTP TFT LCD with Embedded System Board (LVDS) - Raystar

10.1" RTP TFT LCD with Embedded System Board (LVDS)

Model No. RUAAAA120V101AWCSX00

Motherboard Feature :

  • Motherboard only
  • NXP Cortex-A9 Dual core 1.0GHz
  • On-board DDR3 Up to 2GB & 8GB eMMC NAND Flash
  • Support LVDS high solution display & RGB interface
  • Low power consumption
  • Support Android 4.2 / Linux
  • Support 5 types TFT Module from 5"~12.1" (Support RGB & LVDS)

Inquiry or Demo Code Back
Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Electrical Characteristics
  • Embedded Specs
  • Embedded Drawing
Item Dimension Unit
Size 10.1 inch
Dot Matrix (Resolution) 1024 × RGB × 600 (TFT) dots
Module Dimension 235.0 × 143.0 mm
View Area 226.0 × 128.5 mm
Active Area 222.72 × 125.28 mm
LCD Type TFT, Normally White, Transmissive
View Direction 12 o’clock
Gray Scale Inversion Direction 6 o’clock
Aspect Ratio 16:9
Backlight Type LED, Normally White
Interface LVDS
Touch Panel Resistive Touch Panel, RTP
Surface Glare
Power Supply +3.3V power supply of VCC
Operating Temperature -20~70 °C
Storage Temperature -30~80 °C
Feature Motherboard+WF101A+RTP (w/ LVDS & RTP Cable)

LCM PIN Definition

Pin No Symbol function
1 VCC Power Voltage
2 DC +5V Digital circuit
3 VCC Power Voltage
4 LED+ Backlight Power
5 RXIN0- Negative LVDS differential data input
6 NC No Connection
7 RXIN0+ Positive LVDS differential data input
8 PWM LED backlight Control
9 GND Power Ground
10 RXIN3- Negative LVDS differential data input
11 RXIN1- Negative LVDS differential data input
12 RXIN3+ Positive LVDS differential data input
13 RXIN1+ Positive LVDS differential data input
14 GND Ground
15 GND Ground
16 RXCLKIN- Negative LVDS differential clock input
17 RXIN2- Negative LVDS differential data input
18 RXCLKIN+ Positive LVDS differential clock input
19 RXIN2+ Positive LVDS differential data input
20 GND Ground

 

PIN Symbol
1 YU
2 XR  
3 YD  
4 XL

10.1 RTP TFT LCD with Embedded System Board (LVDS) - Raystar

Operationg conditions

Item Symbol Min Typ Max Unit
Supply Voltage VCC 3 3.3 3.6 V
Supply Current ICC --- 14 12 mA

B/L driving conditions

Parameter Symbol Min Typ Max Unit
LED Voltage VBL+ 8.4 9.6 10.8 V
LED Current IL 135 140 150 mA
Form Factor
Processor System Cpu NXP Cortex-A9 Dual core 1.0GHz (Quad core is optional)
Technology DDR3 1GB x64 bit at 400MHz
Capacity Onboard DDR3 1GB(2GB Max)
Flash  4GB(8GB Max) eMMC NAND Flash for Advantech boot loader
Graphic LVDS Dual output 24 bit LVDS(1024*600 or 1024*768)
RGB 18-bits/24-bits TTL with DE+H/V sync(800*480)
Graphic engine 3D GPU with 1 shadow
H/W Vodeo codec Support MPEG 1/2/4, H.262 Hardware Decoder.
MIPI Reserved
Ethernet Speed Ethernet 10/100/1000
I/O USB 2 x USB 2.0 Host ;1 x USB 2.0 OTG
2 x pin header
Audio Wolfson (Line out)
Serial port RS232 (1*DB9 ) ; RS485/422/232 (1 * pin header)
SPI 2 (Host, option) 
IIC 2 (Client, option)
Touch 4-wire Resistive type(onboard)/ PCAP is driven IIC interface  
GPIO 16-pin 3.3V TTL Level GPIOs 
Expansion SD Socket 1 * SD Slot
Power Voltage DC12V
Consumption 2.5W
Environment Temperature -10℃~60℃/ -20℃~70℃
Dimension Motherboard  114mm * 95mm * 20mm

Embedded Motherboards, Embedded Board, Single Board, Embedded System Board - Raystar

Top