- Spécification
- Fonction des broches d’interface
- Dessin de contour
- Valeurs absolues maximales
- Caractéristiques électroniques
| Article | Dimensions | Unité |
|---|---|---|
| Structure | COB | |
| Taille (diagonale) | 2.68 | pouces |
| Résolution matricielle | 128 × 64 | points |
| Dimensions du module | 78.0 × 70.0 × 14.3 (MAX) | mm |
| Surface de visée (VA) | 62.0 × 44.0 | mm |
| Aire active (AA) | 56.28 × 38.36 | mm |
| Trou de montage | 68.0 × 64.92 | mm |
| Taille de point et de pixel | 0.40 × 0.56 | mm |
| Espacement de point et de pixel | 0.44 × 0.60 | mm |
| IC | RA6963 ou équivalent | |
| Interface | 8080 | |
| Tension d’alimentation | 5V Tension négative inclus |
|
| Duty | 1/64 cycle de service | |
| Type | Afficheur LCD graphique |
| Pin No. | Symbol | Level | Description |
|---|---|---|---|
| 1 | Vee | — | Negative Voltage Output |
| 2 | Vss | — | GND |
| 3 | Vdd | — | Power supply |
| 4 | Vo | — | Power supply for LCD driver |
| 5 | /WR | L | Data write. Write data into RA6963WR = L |
| 6 | /RD | L | Data read. Read data from RA6963RD = L |
| 7 | /CE | L | L : Chip enable |
| 8 | /CD | H/L | WR=L , C/D=H : Command Write C/D=L: Data write |
| 9 | /RESET | H/L | H : Normal ; L : Initialize RA6963 |
| 10 | DB0 | H/L | Data bus line |
| 11 | DB1 | H/L | Data bus line |
| 12 | DB2 | H/L | Data bus line |
| 13 | DB3 | H/L | Data bus line |
| 14 | DB4 | H/L | Data bus line |
| 15 | DB5 | H/L | Data bus line |
| 16 | DB6 | H/L | Data bus line |
| 17 | DB7 | H/L | Data bus line |
| 18 | FS | H/L | Pins for selection of font ; H : 6 * 8 , L : 8 * 8 |
| 19 | K | — | Power supply for LED B/L- |
| 20 | A | — | Power supply for LED B/L+ |

| Article | Symbole | Valeur Min | Valeur Type | Valeur Max | Unité |
|---|---|---|---|---|---|
| Température Fonctionnement | TOP | -20 | - | +70 | ℃ |
| Température Stockage | TST | -30 | - | +80 | ℃ |
| Tension d'entrée | VIN | -0.3 | - | VDD+0.3 | V |
| Tension d'alimentation pour Logique | VDD-VSS | -0.3 | - | +7.0 | V |
| Article | Symbole | État | Valeur Min | Valeur Type | Valeur Max | Unité |
|---|---|---|---|---|---|---|
| Tension d'alimentation pour Logique | VDD-VSS | - | 4.5 | 5.0 | 5.5 | V |
| Tension d'alimentation pour LCD | VDD-V0 | Ta=-20℃ Ta=25℃ Ta=70℃ |
- 8.2 7.6 |
- 8.5 - |
9.8 8.8 - |
V V V |
| Entrée Haute Tension | VIH | - | 0.8VDD | - | VDD | V |
| Entrée Basse Tension | VIL | - | 0 | - | 0.15 VDD | V |
| Sortie Haute Tension | VOH | - | VDD-0.3 | - | VDD | V |
| Sortie Basse Tension | VOL | - | 0 | - | 0.3 | V |
| Courant d'alimentation | IDD | - | 11 | 12 | 13 | mA |












