- Spécification
- Fonction des broches d’interface
- Dessin de contour
- Valeurs absolues maximales
- Paramètres électriques
| Article | Dimensions | Unité |
|---|---|---|
| Série TFT | Écran IPS TFT,Écran LVDS TFT,TFT haute résolution | |
| Taille (diagonale) | 10.1 | pouces |
| Résolution matricielle | 1920 (H) × RGB × 1200 (V) | points |
| Dimensions du module | 231.40 × 152.3 × 9.1 (Max.) | mm |
| Aire active (AA) | 216.8064 (H) × 135.504 (V) | mm |
| Espacement de point et de pixel | 0.11292 (H) × 0.11292 (V) | mm |
| Mode d’affichage | TFT, Noir, Transmissif | |
| Direction de visée | 80/80/80/80 (IPS) | |
| Rapport longueur | 16:10 | |
| Type de rétroéclairage | LED, Blanc | |
| Carte de commande | No | |
| Power Board | No | |
| IC | AMC8601 | |
| Interface | 2ch-LVDS | |
| Pavé tactile | Sans écran tactile | |
| Surface | Reflets (Glare) | |
| Luminosité | 500 | cd/㎡ |
| O-Film | No | |
| Température de fonctionnement | -20~+70 | °C |
| Température de rangement | -30~+80 | °C |
TFT LCD Module
| Pin No. | Symbole | Description |
|---|---|---|
| 1-5 | NC | No connection |
| 6 | GND | Ground |
| 7 | ELV3P | EVEN LVDS Positive data signal (+) |
| 8 | ELV3N | EVEN LVDS Negative data signal (-) |
| 9 | GND | Ground |
| 10 | ELV2P | EVEN LVDS Positive data signal (+) |
| 11 | ELV2N | EVEN LVDS Negative data signal (-) |
| 12 | GND | Ground |
| 13 | ELVCLKP | EVEN LVDS Positive CLK signal (+) |
| 14 | ELVCLKN | EVEN LVDS Negative CLK signal (-) |
| 15 | GND | Ground |
| 16 | ELV1P | EVEN LVDS Positive data signal (+) |
| 17 | ELV1N | EVEN LVDS Negative data signal (-) |
| 18 | GND | Ground |
| 19 | ELV0P | EVEN LVDS Positive data signal (+) |
| 20 | ELV0N | EVEN LVDS Negative data signal (-) |
| 21 | GND | Ground |
| 22 | OLV3P | Odd LVDS Positive data signal (+) |
| 23 | OLV3N | Odd LVDS Negative data signal (-) |
| 24 | GND | Ground |
| 25 | OLV2P | Odd LVDS Positive data signal (+) |
| 26 | OLV2N | Odd LVDS Negative data signal (-) |
| 27 | GND | Ground |
| 28 | OLVCLKP | Odd LVDS Positive CLK signal (+) |
| 29 | OLVCLKN | Odd LVDS Negative CLK signal (-) |
| 30 | GND | Ground |
| 31 | OLV1P | Odd LVDS Positive data signal (+) |
| 32 | OLV1N | Odd LVDS Negative data signal (-) |
| 33 | GND | Ground |
| 34 | OLV0P | Odd LVDS Positive data signal (+) |
| 35 | OLV0N | Odd LVDS Negative data signal (-) |
| 36 | GND | Ground |
| 37 -39 | NC | No connection (PIN39 and PIN40 cannot be short-circuited together) |
| 40 | NC | No connection alone |
| 41-45 | VDDIN | Power supply VDDIN=3.3V (Typ.) |
Backlight Pin Definition
| Pin No. | Symbole | Description |
|---|---|---|
| 1 | VLED+ | Red, LED_ Anode |
| 2 | VLED- | Black, LED_ Cathode |
| Élément | Symbole | Min | Type | Max | Unité |
|---|---|---|---|---|---|
| Température de fonctionnement | TOP | -20 | － | +70 | ℃ |
| Température de stockage | TST | -30 | － | +80 | ℃ |
Conditions de fonctionnement normal (At Ta = 25 °C,)
| Élément | Symbole | Min | Type | Max | Unité |
|---|---|---|---|---|---|
| Tension d’alimentation | VDDIN | 3.0 | 3.3 | 3.6 | V |
| VRP | - | - | 300 | mV | |
| Power Supply Current | IDD | - | 300 | 360 | mA |
| Consommation électrique | PLCD | - | 1 | 1.2 | W |
| Rush current | IRUSH | - | - | 3.0 | A |
Paramètres d’attaque du rétroéclairage
| Paramètre | Symbole | Min | Typ | Max | Unité |
|---|---|---|---|---|---|
| Supply Voltage of White LED Backlight | VL | 26.0 | 29.0 | 33.0 | V |
| Current for LED Backlight | IL | - | 200 | - | mA |
| Durée de vie utile LED | - | 50,000 | - | - | Hr |
