- Allgemeine Spezifikationen
- Schnittstelle Pin-Funktion
- Zeichnung
- Absolute Grenzwerte
- Elektrische Eigenschaften
| Artikel | Ausmaß | Einheit |
|---|---|---|
| TFT-Serie | TFT-Display mit hoher Helligkeit,TFTs mit breitem Temperaturbereich,IPS-TFT-LCD-Anzeige,LVDS-TFT-LCD-Anzeige | |
| Größe (Diagonale) | 7 | Zoll |
| Punktmatrix (Auflösung) | 800 × RGB × 480 (TFT) | Punkte |
| Abmaße der modul | 165.8 (W) × 106.61 (H) × 6.5 (D) | mm |
| Aktiver Bereich (AA) | 152.40 × 91.44 | mm |
| Punktabstand | 0.1905 × 0.1905 | mm |
| LCD-Typ | TFT, Schwarz, Transmissiv | |
| Betrachtungsrichtung | 80/80/80/80 (IPS) | |
| Seitenverhältnis | 15:9 | |
| Backlight-Typ | LED, Weiß | |
| Steuerplatine | No | |
| Netzplatine | No | |
| TFT-Treiber-IC | HX8249-A+HX8678-C | |
| Schnittstelle | LVDS | |
| Touchscreen | ohne Touchscreen | |
| Oberfläche | Anti-Reflextion (Anti-glare) | |
| Helligkeit | 1000 | cd/㎡ |
| O-Film | No | |
| Betriebstemperatur | -30~+80 | °C |
| Lagertemperatur | -40~+85 | °C |
LCM-Pinbelegung
| Pin No. | Symbol | Funktion | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | VCC | Power voltage | |||||||||
| 2 | VCC | Power voltage | |||||||||
| 3 | GND | Power Ground | |||||||||
| 4 | GND | Power Ground | |||||||||
| 5 | LVD0N | Input pins without termination resistor for LVDS mode. Keep these pins floating or connect to VSS1 if not used. |
|||||||||
| 6 | LVD0P | ||||||||||
| 7 | GND | Power Ground | |||||||||
| 8 | LVD1N | Input pins without termination resistor for LVDS mode. Keep these pins floating or connect to VSS1 if not used. |
|||||||||
| 9 | LVD1P | ||||||||||
| 10 | GND | Power Ground | |||||||||
| 11 | LVD2N | Input pins without termination resistor for LVDS mode. Keep these pins floating or connect to VSS1 if not used. |
|||||||||
| 12 | LVD2P | ||||||||||
| 13 | GND | Power Ground | |||||||||
| 14 | LVDSCKN | Input pins without termination resistor for LVDS mode. Keep these pins floating or connect to VSS1 if not used. |
|||||||||
| 15 | LVDSCKP | ||||||||||
| 16 | GND | Power Ground | |||||||||
| 17 | LVD3N | Input pins without termination resistor for LVDS mode. Keep these pins floating or connect to VSS1 if not used. |
|||||||||
| 18 | LVD3P | ||||||||||
| 19 | DINT | Input data format selection. Effective when FCS=1.
|
|||||||||
| 20 | SC | RL & TB Selection 1: Left to Right, Top to Bottom. (Default) 0: Right to Left, Bottom to Left. |
B/L-Pinbelegung
| Pin No. | Symbol | Beschreibung |
|---|---|---|
| 1 | VLED+ | Red, LED_ Anode |
| 2 | VLED- | Black, LED_ Cathode |
| Artikel | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
|---|---|---|---|---|---|
| Betriebstemperatur | TOP | -30 | － | +80 | ℃ |
| Lagertemperatur | TST | -40 | － | +85 | ℃ |
Betriebsbedingungen
| Artikel | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit | Bemerkung |
|---|---|---|---|---|---|---|
| Versorgungsspannung | Vcc | 2.7 | 3.3 | 3.6 | V | － |
| Current of power supply | Icc | － | 133 | 200 | mA | Vcc =3.3V |
LED-Ansteuerungsbedingungen
| Parameter | Symbol | Mindestwert | typischer Wert | Maximalwert | Einheit |
|---|---|---|---|---|---|
| LED-Strom | － | － | 450 | － | mA |
| LED-Spannung | VLED+ | 8.1 | 9.3 | 10.2 | V |
| LED-Lebensdauer | － | 40,000 | － | － | Hr |
