RX24064A1 - Raystar Optronics, Inc.

Artikel	Ausmaß	Einheit
Bauweise	COG
Größe (Diagonale)	5.18	Zoll
Punktmatrix (Auflösung)	240 × 64 Punkte	Punkte
Abmaße der modul	142.5 × 51.7 × 14.9 (MAX)	mm
Anzeigebereich (VA)	130.2 × 37.6	mm
Aktiver Bereich (AA)	127.17 × 33.89	mm
Montagebohrung	135.2 × 44.7	mm
Punktgröße	0.50 × 0.50	mm
Punktabstand	0.53 × 0.53	mm
IC	ST7565P oder gleichwertig
Schnittstelle	6800 / 8080 / SPI
Stromversorgung	3.3V
Duty	1/64
Typ	LCD-Grafikdisplay / Grafikmodul / COG LCD-Anzeige

Pin No.	Symbol	Beschreibung
1	NC	No connection
2	FR	Scan start-up signal
3	CL	External clock 2KHZ
4	/DOF	This is the LCD blanking control terminal.
5	/CS1	The chip select signal
6	CS2	The chip select signal
7	/RES	Controller reset signal, Active Low
8	A0	Data/ Instruction select signal
9	/WR	Data write. Write data into LCD Controller
10	/RD	Data read. Read data from LCD Controller
11~18	DB0~DB7	Data bus line
19	V_DD	Power supply for logic
20	V_SS	Ground
21	Vout	Positive Voltage output
22	C3+	DC/DC voltage converter.
23	C1-	DC/DC voltage converter.
24	C1+	DC/DC voltage converter.
25	C2+	DC/DC voltage converter.
26	C2-	DC/DC voltage converter.
27	V4	Bias voltage levels for LCD driving
28	V3	Bias voltage levels for LCD driving
29	V2	Bias voltage levels for LCD driving
30	V1	Bias voltage levels for LCD driving
31	V0	Bias voltage levels for LCD driving
32	VR	LCD Contrast Adjustment when IRS = “L”
33	C86	Interface selection 6800/8080
34	P/S	Selects the interface type: Serial or Parallel.
35	NC	No connection
36	NC	No connection