SSD1309 OLED-Panels 2,7 Zoll 128x64 - REX012864Q
SSD1309 OLED-Panels 2,7 Zoll 128x64 - REX012864Q
SSD1309 OLED-Panels 2,7 Zoll 128x64 - REX012864Q
SSD1309 OLED-Panels 2,7 Zoll 128x64 - REX012864Q
SSD1309 OLED-Panels 2,7 Zoll 128x64 - REX012864Q

SSD1309 OLED-Panels 2,7 Zoll 128x64

Model No. REX012864Q

REX012864Q ist ein 128x64 Punktmatrix-Grafik-OLED-Display im COG-Design. Die Größe des aktiven Bereichs beträgt 2,7 Zoll diagonal, mit den Moduldimensionen 73x41,86 mm. Dieses 2,7-Zoll-OLED-Modul verfügt über einen integrierten SSD1309-Treiber-IC und bietet ein hohes Kontrastverhältnis von 10.000:1. Es stehen viele Schnittstellenoptionen zur Verfügung, darunter 6800, 8080, 4-adriges SPI und I2C.

Der Logikversorgungsspannungsbereich des REX012864Q SSD1309 OLED-Displays reicht von 2,8V bis 3,3V, der typische Wert beträgt 3V. Die verfügbaren Emissionsfarben sind Weiß, Gelb, Grün und Himmelblau. Das Modul kann im Temperaturbereich von -40℃ bis +80℃ betrieben werden; der Lagerbereich liegt bei -40℃ bis +85℃.

Datenquelle-Referenz: REX012864QWPP3N00000

Zu Anfrage hinzufügen/Demo Code PDF-Download zurück Zurück Weiter
  • Allgemeine Spezifikationen
  • Schnittstelle Pin-Funktion
  • Zeichnung
  • Absolute Grenzwerte
  • Elektrische Eigenschaften
  • Optional
Artikel Ausmaß Einheit
Bauweise COG; Frame Option
Größe (Diagonale) 2.7 Zoll
Punktmatrix (Auflösung) 128 × 64 Punkte
Abmaße der modul 73.0 × 41.86 × 2.05 mm
Anzeigebereich (VA) 63.41 × 32.69 mm
Aktiver Bereich (AA) 61.41 × 30.69 mm
Punktgröße 0.45 × 0.45 mm
Punktabstand 0.48 × 0.48 mm
Emittierende Farbe Weiß / Gelb / Grün / Himmelblau
der Anzeigemodus Passive Matrix
IC SSD1309
Schnittstelle I2C, 4-Wire SPI ,6800, 8080
Stromversorgung 3V
Duty 1/64 duty
Betriebstemperatur -40~+80 °C
Lagertemperatur -40~+85 °C
Polarizer Type Polarizer optional
Typ OLED-Grafikdisplay / Grafikmodul / OLED Anzeige / OLED-Display
No. Symbol Funktion
1 NC No connection
2 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
3 VCOMH COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
4 IREF This pin is the segment output current reference pin.
IREF is supplied externally.
5~12 D7~D0 These pins are bi-directional data bus connecting to the MCU data bus.
Unused pins are recommended to tie LOW.
When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout,
SDAin in application and D0 is the serial clock input, SCL.
13 E/RD# This pin is MCU interface input.
When 6800 interface mode is selected, this pin will be used as the Enable (E) signal.
Read/write operation is initiated when this pin is pulled HIGH and the chip is selected.
When 8080 interface mode is selected, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.
14 R/W# This pin is read / write control input pin connecting to the MCU interface.
When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW.
When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.
15 D/C# This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
In I2C mode, this pin acts as SA0 for slave address selection.
When 3-wire serial interface is selected, this pin must be connected to VSS.
16 RES# This pin is reset signal input.
When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin pull HIGH during normal operation.
17 CS# This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
18 NC No connection
19 BS2 MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS2, BS1 and BS0 are pin select
  BS1 BS2
I2C 1 0
4-wire Serial 0 0
8-bit 68XX Parallel 0 1
8-bit 80XX Parallel 1 1

Note
(1) 0 is connected to VSS
(2) 1 is connected to VDD
20 BS1
21 VDD Power supply pin for core logic operation
22~28 NC No connection
29 VSS Ground.
30 NC No connection

SSD1309 OLED-Panels 2,7 Zoll 128x64 - REX012864Q

Parameter Symbol Mindestwert Maximalwert Einheit
Supply Voltage for Logic VDD -0.3 4 V
Supply Voltage for Display VCC 0 15 V
Betriebstemperatur TOP -40 +80 °C
Lagertemperatur TSTG -40 +85 °C
Artikel Symbol Bedingung Mindestwert typischer Wert Maximalwert Einheit
Supply Voltage for Logic VDD － 2.8 3.0 3.3 V
Supply Voltage for Display VCC － 12.5 13 13.5 V
High Level Input VIH － 0.8×VDD － － V
Low Level Input VIL － － － 0.2×VDD V
High Level Output VOH － 0.9×VDD － － V
Low Level Output VOL － － － 0.1×VDD V
50% Check Board operating Current VCC =13.0V － 22 33 mA

Fram Optional

Drawing Material FR No. Detailed Drawing Create Date
REH012864Q SUS-304 FFL60128640A221XXX00 View 20120131

Related Products

Top