- General Specs
- Interface Pin Function
- Contour Drawing
- Electrical Characteristics
| Item | Dimension | Unit |
|---|---|---|
| Dot Matrix / Resolution | 240 × 64 | dots |
| Module Dimension | 180.0 × 65.0 × 12.3 (MAX) | mm |
| Viewing Area | 133.0 × 39.0 | mm |
| Active Area | 127.16 × 33.88 | mm |
| Mounting Hole | 176.0 × 54.0 | mm |
| Dot / Pixel Size | 0.49 × 0.49 | mm |
| Dot / Pixel Pitch | 0.53 × 0.53 | mm |
| IC | RA6963 or Equivalent | |
| Interface | 8080 | |
| Power Supply | 5V Built-in Negative voltage |
|
| Duty | 1/64 duty cycle | |
| Type | Graphic LCD Display Module |
| Pin No. | Symbol | Description |
|---|---|---|
| 1 | FG | Frame ground |
| 2 | VSS | Ground |
| 3 | VDD | Power supply for logic |
| 4 | VO | Contrast Adjustment |
| 5 | /WR | Data write. Write data into LCD Controller |
| 6 | /RD | Data read. Read data from LCD Controller |
| 7 | /CE | Enable signal |
| 8 | C/D | Data/ Instruction select signal |
| 9 | VEE | Negative Voltage Output |
| 10 | /RESET | Controller reset signal, Active Low |
| 11 | DB0 | Data bus line |
| 12 | DB1 | Data bus line |
| 13 | DB2 | Data bus line |
| 14 | DB3 | Data bus line |
| 15 | DB4 | Data bus line |
| 16 | DB5 | Data bus line |
| 17 | DB6 | Data bus line |
| 18 | DB7 | Data bus line |
| 19 | FS | Selection of font; H : 6 * 8 , L : 8 * 8 |
| 20 | NC | No connection |

| Item | Symbol | Standard Value typ. |
Unit |
|---|---|---|---|
| Input Voltage | VDD | 3/5 | V |
| Recommended LCD Driving Voltage for Normal Temp. Version module @25ºC |
VDD-VO | 12.5 | V |















