- Specifiche generali
- Funzione dei Pin di Interfaccia
- Disegno
- Specifiche
- Description
- GUI Builder
| Articolo | Dimensioni | Unità |
|---|---|---|
| Dimensione (Diagonale) | 3.55 | pollici |
| A matrice di punti (Risoluzione) | 256 × 64 | punti |
| pannello OLED | 100.4 (W) × 36.1 (H) × 3.39 (D) | mm |
| PCB | 157.0 (W) × 40.0 (H) × 1.6 (D) | mm |
| Struttura dell’alloggio | 157.0 (W) × 40.0 (H) × 11.45 (D) | mm |
| Dimensione del modulo | 157.0 (W) × 40.0 (H) × 11.45 (D) | mm |
| Area di visualizzazione (VA) | 88.52 × 22.28 | mm |
| Area attiva (AA) | 95.04 × 53.856 | mm |
| Passo del Dot | 95.04 × 53.856 | mm |
| Supporto scala di grigi | 0.342 × 0.333 | |
| Tipo LCD | OLED, Bianco, Matrice passiva | |
| Scala di grigi | 4-bit | |
| Scheda di controllo | Yes | |
| Interfaccia (System) | CAN Bus differential ± 3.3 | |
| Protocollo | CAN open | |
| I/O(GPIO) | No | |
| MCU | STM32F750 | |
| Punti di rilevamento | 1 | Points |
| Touch Screen | Touchscreen capacitivo, PCAP | |
| Superficie | Bagliore (Glare) | |
| Tensione operativa | 5 | Vdc |
| Duty | 1/64 | |
| Dimensioni memoria flash | 16 | MB |
| SDRAM Frequency | 108 | Mhz |
| Temperatura di lavoro | -20~+70 | °C |
Definizione CN1
| Pin No. | Simbolo | Funzione | Osservazione |
|---|---|---|---|
| 1 | +5V | Power supply 5V input | Input |
| 2 | DGND | Reserved | Output |
| 3 | GND | Power supply GND input | Input |
| 4 | D- | Reserved | I/O |
| 5 | CAN High | CAN bus D+ | I/O |
| 6 | D+ | Reserved | I/O |
| 7 | CAN Low | CAN bus D- | I/O |
| 8 | +5V | Reserved | Output |
| 9 | DGND | Reserved | Output |
| 10 | NC | Reserved | |
| 11 | DGND | Reserved | Output |
| 12 | NC | Reserved | |
| 13 | NC | Reserved | |
| 14 | NC | Reserved | |
| 15 | NC | Reserved | |
| 16 | NC | Reserved |
Definizione CN2
| Pin No. | Simbolo | Funzione | Osservazione |
|---|---|---|---|
| 1 | NC | Reserved | |
| 2 | VDD3V | Input | |
| 3 | NC | Reserved | |
| 4 | TAG_SWCLK | ||
| 5 | NC | Reserved | |
| 6 | GND | ||
| 7 | NC | Reserved | |
| 8 | TAG_SWDI | ||
| 9 | NC | Reserved | |
| 10 | NRST | ||
| 11 | NC | Reserved | |
| 12 | TAG_SWDO | ||
| 13 | DGND | ||
| 14 | DGND | ||
| 15 | +5V | Input | |
| 16 | NC | Reserved |
Valori massimi assoluti
| Articolo | Simbolo | Valore Min | Valore tipico | Valore massimo | Unità |
|---|---|---|---|---|---|
| Temperatura di lavoro | TOP | -20 | － | +70 | ℃ |
| Temperatura di stock | TST | -30 | － | +80 | ℃ |
Caratteristiche elettriche
| Articolo | Simbolo | Condizione | Valore Min | Valore tipico | Valore massimo | Unità |
|---|---|---|---|---|---|---|
| Tensione di Alimentazione | +5V | － | 4.4 | 5 | 5.6 | V |
| Fornitura di Corrente | I (mA) | － | 355 | 425 | 500 | mA |
BOM
| Articolo | Funzione |
|---|---|
| LCM | REX025664DWPP3L00000 |
| PCBA | SV102566400DA00N0100 |
Forniamo anche un set demo con tutti gli accessori necessari per realizzare il design GUI sui display.
1. Introduction of Raystar Smart Display GUI Builder
1-1 Dragging Widgets & preview function:
Users are able to design their screen appearance by dragging widgets on Raystar GUI Builder, and you also get a live preview of the changes. With the concept of "what you see is what you get", this function is time-saving for screen appearance design.
1-2 Simulator function:
There’s no need to purchase the hardware (Smart Display) to demonstrate the display effects and interactive behaviors. Users only need to use Raystar GUI Builder application software simulator to simulate the display effects and functions on the computer which greatly reduce costs and speed up project development.
1-3 Change or build GUI design on the client-side:
Instead of creating graphical objects through the Raystar engineering team, customers can replace or create GUI designs by themselves. But if customers have any other demands, we can also provide custom-design graphics objects.
1-4 How to get Raystar’s GUI Builder?
All you need is to contact us through our website or send inquiries to our sales email address. We'll provide it free of charge.
2.Smart Display GUI Builder introduction of operation and toolbar
2-1 The Start screen of Smart Display GUI Builder
2-2 The design page of Smart Display GUI Builder
2-3 Customization by Smart Display GUI Builder
2-4 Simulation by Smart Display GUI Builder
2-5 HW device update
2-6 The settings of installation
Install USB2CAN Driver:
*Execute stlink_winusb_install.bat (Please contact us to get the file)
Install Microsoft Visual C++ 2015-2019 Redistributable (x86)
*Execute VC_redist.x86.exe (Please contact us to get the file)
Install Smart Display GUI Builder
*Execute RaystarSmartDisplayGUIBuilderSetup_v0.1.5.msi (Please contact us to get the file)
*An icon of “Raystar SmartDisplay GUI Builder” will be shown after installing
