- Specifiche generali
- Funzione dei Pin di Interfaccia
- Disegno
- Valori massimi assoluti
- Caratteristiche elettriche
| Articolo | Dimensioni | Unità |
|---|---|---|
| Struttura | COB | |
| Dimensione (Diagonale) | 1.86 | pollici |
| A matrice di punti (Risoluzione) | 122 × 32 | punti |
| Dimensione del modulo | 59.0 × 29.3 × 5.5 (Max) | mm |
| Area di visualizzazione (VA) | 52.0 × 15.0 | mm |
| Area attiva (AA) | 45.72 × 11.97 | mm |
| Fori di montaggio | 50.0 | mm |
| Dimensioni del Dot | 0.345 × 0.345 | mm |
| Passo del Dot | 0.375 × 0.375 | mm |
| Tipo di backlight | LED bianco disponibile senza Retroilluminazione | |
| IC | AIP315 | |
| Interfaccia | 6800 | |
| Duty | 1/32 duty cycle | |
| A bordo Controllore versione cinese | RG12232C3 | |
| Type | Modulo display LCD grafico | |
| Feature | Pin Versione passo 2,0 millimetri : RG12232C4 |
| Pin No. | Simbolo | Level | DESCRIZIONE |
|---|---|---|---|
| 1 | /VLED | 0V | B/L Selected |
| 2 | VSS | 0V | Ground |
| 3 | VDD | 5.0V | Power supply for logic |
| 4 | Vo | (Variable) | Contrast Adjustment |
| 5 | A0 | H/L | H : Data L : Instruction |
| 6 | E1 | H/L | Chip select signal for IC1 ( left 61*32 dots ) active “H” |
| 7 | E2 | H/L | Chip select signal for IC2 ( right 61*32 dots ) active “H” |
| 8 | DB0 | H/L | Data bus line |
| 9 | DB1 | H/L | Data bus line |
| 10 | DB2 | H/L | Data bus line |
| 11 | DB3 | H/L | Data bus line |
| 12 | DB4 | H/L | Data bus line |
| 13 | DB5 | H/L | Data bus line |
| 14 | DB6 | H/L | Data bus line |
| 15 | DB7 | H/L | Data bus line |
| 16 | R/W | H/L | H : Read ; L : Write |
| 17 | Vee | — | Negative voltage output |
| 18 | NC | — | No connection |

| Articolo | Simbolo | Valore Min | Valore Tipico | Valore Massimo | Unità |
|---|---|---|---|---|---|
| Temperatura Lavoro | TOP | -20 | - | +70 | ℃ |
| Temperatura Stock | TST | -30 | - | +80 | ℃ |
| Tensione Ingresso | VI | -0.3 | - | VDD+0.3 | V |
| Tensione Alimentazione per Logica | VDD-VSS | -0.3 | - | +6.0 | V |
| LCD Bias Voltage | VLCD | 3.5 | - | 13 | V |
| Articolo | Simbolo | Condizione | Valore Min | Valore Tipico | Valore Massimo | Unità |
|---|---|---|---|---|---|---|
| Tensione Alimentazione per Logica | VDD-VSS | - | 4.5 | 5.0 | 5.5 | V |
| Tensione Alimentazione per LCD | VDD-V0 | Ta=-20℃ Ta=25℃ Ta=+70℃ |
- 4.2 3.9 |
- 4.35 - |
5.8 4.5 - |
V V V |
| Tensione Ingresso (Alta) | VIH | VDD =5.0 | 3.0 | 5.0 | VDD+0.5 | V |
| Tensione Ingresso (Bassa) | VIL | - | 0 | 0.7 | 1.1 | V |
| Uscita Alta Tensione | VOH | - | VDD-0.3 | - | VDD | V |
| Uscita Bassa tensione | VOL | - | 0 | - | 0.3 | V |
| Fornitura di Corrente | IDD | VDD=5.0V | - | 0.5 | 1.5 | mA |













