- 規格説明
- ピン配置
- 外形図
- 電気特性
| 項目 | 仕様 | 単位 |
|---|---|---|
| サイズ(対角線) | 2.13 | インチ |
| ドットマトリックス / 解像度 | 122 (H) × 250 (V) | ドット |
| 外形寸法 | 29.2 (H) × 59.2 (V) × 1.4 (D) | mm |
| アクティブエリア(AA) | 23.7 × 48.5 | mm |
| ピクセル配列 | Square | |
| インターフェス | SPI | |
| タッチパネル | なし | |
| 操作温度 | 0~+50 | °C |
| 保存温度 | -25~+70 | °C |
入力/出力ピンの割り当て
| Pin No. | 記号 | I/O | ご説明 |
|---|---|---|---|
| 1 | NC | Do not connect with other NC pins | |
| 2 | GDR | O | N-Channel MOSFET Gate Drive Control |
| 3 | RESE | I | Current Sense Input for the Control Loop |
| 4 | NC | NC | Do not connect with other NC pins |
| 5 | VSH2 | C | Positive Source driving voltage(Red) |
| 6 | TSCL | O | I2C Interface to digital temperature sensor Clock pin |
| 7 | TSDA | I/O | I2C Interface to digital temperature sensor Data pin |
| 8 | BS1 | I | Bus Interface selection pin |
| 9 | BUSY | O | Busy state output pin |
| 10 | RES# | I | Reset signal input. Active Low. |
| 11 | D/C# | I | Data /Command control pin |
| 12 | CS# | I | Chip select input pin |
| 13 | SCL | I | Serial Clock pin (SPI) |
| 14 | SDA | I/O | Serial Data pin (SPI) |
| 15 | VDDIO | P | Power Supply for interface logic pins It should be connected with VCI |
| 16 | VCI | P | Power Supply for the chip |
| 17 | VSS | P | Ground |
| 18 | VDD | C | Core logic power pin VDD can be regulated internally from VCI. A capacitor should be connected between VDD and VSS |
| 19 | VPP | P | FOR TEST |
| 20 | VSH1 | C | Positive Source driving voltage |
| 21 | VGH | C | Power Supply pin for Positive Gate driving voltage and VSH1 |
| 22 | VSL | C | Negative Source driving voltage |
| 23 | VGL | C | Power Supply pin for Negative Gate driving voltage VCOM and VSL |
| 24 | VCOM | C | VCOM driving voltage |

絶対最大定格
| パラメーター | 記号 | Rating | 単位 |
|---|---|---|---|
| ロジック電源電圧 | VCI | -0.5 to +4.0 | V |
| ロジック入力電圧 | VIN | -0.5 to VCI +0.5 | V |
| ロジック出力電圧 | VOUT | -0.5 to VCI +0.5 | V |
| 操作温度 | TOPR | 0 to +50 | ºC |
| 保存温度 | TSTG | -25 to+70 | ºC |
| 最適な保管湿度 | HSTGo | 55±10 | %RH |










