- 仕様
- ピン配置
- 外形図
- 絶対最大定格
- 電気特性
| 項目 | 仕様 | 単位 |
|---|---|---|
| 構造 | COG + PCB | |
| サイズ(対角線) | 1.5 | インチ |
| ドットマトリックス / 解像度 | 128 × 128 | ドット |
| モジュール寸法 | 34.2 × 45.5 × 3.16 | mm |
| ビューイングエリア(VA) | 28.86 × 28.86 | mm |
| アクティブエリア(AA) | 26.86 × 26.86 | mm |
| ドットサイズ | 0.185 × 0.185 | mm |
| ドットピッチ | 0.210 × 0.210 | mm |
| 表示色 | OLED, 白色 / 黄色 | |
| グレースケールをサポートする | あり | |
| ディスプレモード | パッシブマトリクス | |
| グレースケール | 4 bits | |
| IC | SSD1327 | |
| インターフェス | 4線式 SPI / I2C | |
| 供給電圧 | 3.3V / 5V | |
| Duty | 1/128 duty | |
| 操作温度 | -40~+80 | °C |
| 保存温度 | -40~+85 | °C |
| 偏光板タイプ | 偏光板オプション | |
| タイプ | グラフィック型 OLED モジュール |
| Pin No. | 記号 | 功能 |
|---|---|---|
| 1 | GND | This is a ground pin. |
| 2 | VCC | Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source. |
| 3 | D0 | These pins are bi-directional data bus connecting to the MCU data bus. Unused pins are recommended to tie LOW. When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC. |
| 4 | D1 | |
| 5 | RES# | This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin pull HIGH during normal operation. |
| 6 | D/C# | This pin is Data/Command control pin connecting to the MCU. When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data. When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register. |
| 7 | CS# | This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW). |

| パラメーター | 記号 | 最小値 | 最大値 | 単位 |
|---|---|---|---|---|
| ロジック電源電圧 | VCC | 1.65 | 5.5 | V |
| 操作温度 | TOP | -40 | +80 | °C |
| 保存温度 | TSTG | -40 | +85 | °C |
DC 電気特性
| 項目 | 記号 | 条件 | 最小値 | 典型値 | 最大値 | 単位 |
|---|---|---|---|---|---|---|
| ロジック電源電圧 (3V/5V) | VCC | - | 2.8 | 3.3 | 5.2 | V |
| 入力電圧(High) | VIH | - | 0.8×VCC | - | VCC | V |
| 入力電圧(Low) | VIL | - | 0 | - | 0.2×VCC | V |
| 出力電圧(High) | VOH | - | 0.9×VCC | - | VCC | V |
| 出力電圧(Low) | VOL | - | 0 | - | 0.1×VCC | V |
| 50% ボードの動作電流をチェック | ICC | VCC=3.3V | - | 160 | 320 | mA |











