If you're having trouble viewing this email, you may see it online
E-Newsletter
Insight Of Next Display【Issue No.107】 June, 2019
+886-4-25650761 sales@raystar-optronics.com www.raystar-optronics.com
June, 2019
Dear RAYSTAR News Reader,
Welcome to this issue of newsletter delivers you updated info. Thank you for your continuously support to RAYSTAR News.
Contents in Issue No. 107
1. Shipping Arrangement before Stocktaking
2. Shipping Address for RMA Return Goods to Taiwan
3. [REX012864L-ZIF ] OLED Display Module 128x64, 1.28" (ZIF FPC)
4. [RFE430W-AYW-DNN] 4.3", 480x272 IPS TFT LCD Display Module
5. [RFE430W-AYH-DNN] 4.3" IPS High Brightness TFT LCD Display Module
6. HDMI TFT-LCD Series

1. Shipping Arrangement before Stocktaking

Raystar will have half yearly inventory audit in late of June for Taiwan and China plants. Please note that we will stop shipping and receiving shipment during this period. Below are the last shipping date before the inventory check and the first shipping date after the stocktaking for your reference. Please work with Raystar sales persons closely before the stocktaking if your shipment might be affected.

Shipping From China

► Last shipping date: June 27, 2019
► First shipping date: July 1, 2019
Shipping From Taiwan

► Last shipping date: June 25, 2019
► First shipping date: July 1, 2019

Shipping Arrangement before Stocktaking


2. Shipping Address for RMA Return Goods to Taiwan

Raystar RMA office is not in our headquarters office which is located in another building in Central Taiwan Science Park of Taiwan. For RMA return goods, please contact your Raystar sales persons before shipping in order to receive a Return Material Authorization (RMA) number. Please mark RMA number on outside of carton and add RMA NO. on shipping documents.

RMA Address: 2F, No.25, Keya Rd., Daya Dist., Taichung City 428, Taiwan
Tel: +886-4-2568 9987
Fax: +886-4-2568 7763

Recipient: please mark: "Raystar RMA Center"
Please mark “RMA” number on carton, and add RMA no. on shipping documents.




3. [REX012864L-ZIF ] OLED Display Module 128x64, 1.28" (ZIF FPC)

REX012864L-ZIF is a 1.28" COG ZIF version OLED display module; it's made of 128x64 dot matrix format. This 1.28 inch Graphic OLED module is built in with controller SH1106G IC; it supports 8-bit 6800 and 8080, 3-wire/4-wire SPI and I2C interfaces. REX012864L-ZIF module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃. These OLED COG modules are ultra thin, lightweight and low power consumption which is great for handheld instruments, meters, smart grid, medical device, IoT system, etc. This model is available in white and yellow colors. For detail information, please contact us.


REX012864L-ZIF

Specification:

  • Module dimension: 34.50 × 23.00 × 1.65 mm
  • Active area: 29.42 × 14.20 mm
  • Dot Matrix: 128×64
  • Pixel size: 0.205 × 0.197 mm
  • Pixel pitch: 0.230 × 0.222 mm
  • Duty: 1/64 Duty
  • Display Mode:Passive Matrix
  • Display Color: Yellow / White
  • IC: SH1106G
  • Interface: 6800/8080/3-SPI /4-SPI / I2C
  • Size: 1.28 inch

REX012864L-ZIF

Link to REX012864L-ZIF



4. [RFE430W-AYW-DNN] 4.3", 480x272 IPS TFT LCD Display Module

RFE430W-AYW-DNN is a 4.3” IPS TFT display with resolution 480x270 pixels. It is built in with SC7283 driver IC; it supports RGB-24bit interface, with brightness 500 nits (typical value), aspect ratio 16:9, contrast ratio 800 (typical value), glare surface glass. We also offer Resistive Touch Panels (RTP) and Projected Capacitive Touch Panel (PCAP) optional for RFE430W model.

This 4.3 inch TFT-LCD is an IPS (In-Plane Switching) Panel which having the advantage of wider viewing angle of Left:80 / Right:80 / Up:80 / Down:80 degree (typical) provides great angle-visibility. RFE430W-AYW-DNN module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.


RFE430W-AYW-DNN

Specification:

  • Size: 4.3 inch
  • Dot Matrix: 480 x RGB x 272(TFT) dots
  • Module dimension: 105.5(W) x 67.2(H) x 2.95(D) mm
  • Active area: 95.04 x 53.856 mm
  • Dot pitch: 0.066 x 0.198 mm
  • LCD type: TFT, Normally Black, Transmissive
  • Aspect Ratio: 16:9
  • TFT Driver IC: SC7283 or equivalent
  • Interface: 24-bit RGB
  • Backlight Type: LED, Normally White
  • Touch Panel: PCAP / RTP Option
  • Surface: Glare

RFE430W-AYW-DNN



5. [RFE430W-AYH-DNN] 4.3" IPS High Brightness TFT LCD Display Module

RFE430W-AYH-DNN is a High Brightness 4.3 inch wider view angle IPS TFT LCD module, with 480x272 pixels. This TFT model is built in with SC7283 driver IC, it supports 24-bit RGB interface, brightness 1000 nits (typical value). We also offer Resistive Touch Panels (RTP) and Projected Capacitive Touch Panel (PCAP) optional for RFE430W model.

This 4.3” IPS TFT has a wider viewing angle than TN TFT, the view angle is Left:80 / Right:80 / Up:80 / Down:80 degree (typical value). The supply voltage for LCM (VCC) of RFE430W-AYH-DNN is from 3.0V to 3.6V, Glare surface glass, aspect ratio 16:9, contrast ratio 800 (typical value). It can be operating at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃.


RFE430W-AYH-DNN

Specification:

  • Size: 4.3 inch
  • Dot Matrix: 480 x RGB x 272(TFT) dots
  • Module dimension: 105.5(W) x 67.2(H) x 2.95(D) mm
  • Active area: 95.04 x 53.856 mm
  • Dot pitch: 0.066 x 0.198 mm
  • LCD type: TFT, Normally Black, Transmissive
  • Aspect Ratio: 16:9
  • TFT Driver IC: SC7283 or equivalent
  • Interface: 24-bit RGB
  • Backlight Type: LED, Normally White
  • Touch Panel: PCAP / RTP Option
  • Surface: Glare

RFE430W-AYH-DNN



6. HDMI TFT-LCD Series

Raystar TFT LCD product portfolio come with HDMI interface TFT LCD modules, our HDMI Displays Family are designed to work with the Raspberry Pi or embedded system, single board computers (or desktop/laptops) which requires HDMI output. These series TFT modules come with a control board with HDMI interface; it is designed to make Raspberry Pi usage become easily. Please note our standard HDMI TFT modules which part number suffixed with “X” support Raspberry Pi 1~3 version only. If customers’ application requires supporting Raspberry Pi3B+ version, please choose the module part numbers suffixed with “V” which support Pi3B+ version. More details, please check our website.

Our HDMI TFT modules now are available in sizes 5”, 7” and 10.1 inch. We offer Resistive Touch Panels (RTP) and Projected Capacitive Touch Panel (PCAP) for each size. The HDMI TFT is becoming more popular, customers can simply use the HDMI TFT display with your Raspberry Pi, and also you can use it as computer display with any device which has HDMI output.

Welcome to check online for the specification including panel size, controller IC, brightness, as well as resolution. For more detailed information , please contact our online.


Raystar HDMI TFT LCD

Link to Raystar HDMI TFT LCD

Friendly Printing


TEL : 886-4-2565-0761 FAX : 886-4-2565-0760 E-mail : sales@raystar-optronics.com
Copyright © Raystar Optronics, Inc. All Rights Reserved.