If you're having trouble viewing this email, you may see it online
E-Newsletter
Insight Of Next Display【Issue No.111】 October, 2019
+886-4-25650761 sales@raystar-optronics.com www.raystar-optronics.com
October, 2019
Dear RAYSTAR News Reader,
Welcome to this issue of newsletter delivers you updated info. Thank you for your continuously support to RAYSTAR News.

Contents in Issue No. 111
1. [REX009632B] 0.68 inch 96x32 Graphic OLED Display
2. [REX012864Y] 1.54 inch 128x64 OLED Display Module
3. [RX320240D] COG LCD Module 320x240

1. [REX009632B] 0.68 inch 96x32 Graphic OLED Display

REX009632B is a mini OLED display which is made of 96x32 dots, diagonal size 0.68 inch. REX009632B is built in with SSD1305 driver IC; it supports 6800/8080 8-bit parallel, I2C and 4-wire SPI interface, The supply voltage for logic of REX009632B is 3V, 1/32 driver duty, display with 50% check board current is 3.6mA@ 12Vcc (typical value). This OLED module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

REX009632B mini COG PMOLED module is ultra thin only 1.21 mm; lightweight and low power consumption. It is suitable for wearable device, smart home application, portable device, meter device, personal care appliance, voice recorder pen, health device, etc.

REX009632B - Raystar

General Specification:

■Module dimension: 19.80 x 12.32 x 1.21 mm
■Active area: 16.298 x 5.418 mm
■Dot Matrix: 96 x 32
■Dot size: 0.148 x 0.148 mm
■Dot pitch: 0.17 x 0.17 mm
■Display Mode: Passive Matrix
■Duty: 1/32 Duty
■Display Color: OLED , White / Yellow
■Controller IC: SSD1305
■Interface: 6800,8080,SPI,I2C
■Size: 0.68 inch
REX009632B - Raystar 

>> Link to REX009632B


2. [REX012864Y] 1.54 inch 128x64 OLED Display Module

REX012864Y is a small OLED display which is made of 128x64 dots, diagonal size 1.54 inch. REX012864Y is built in with SSD1309 driver IC; it supports 6800/8080 8-bit parallel, I2C and 4-wire SPI interface, The supply voltage for logic of REX012864Y is 3V, supply voltage for display is 12.5V, 1/64 driver duty, display with 50% check board current is 16mA@ 12.5Vcc (typical value). This OLED module can be operating at temperatures from -40℃ to +70℃; its storage temperatures range from -40℃ to +85℃.

REX012864Y is small COG graphic PMOLED module; ultra thin only 2.01 mm; lightweight and low power consumption. It is suitable for smart home application, portable device, meter device, personal care appliance, handheld instruments, IoT, etc.

REX012864Y - Raystar

General Specification:

■Module dimension: 45.24 x 29.14 x 2.01 mm
■Active area: 35.05 × 17.51 mm
■Dot Matrix: 128 x 64
■Pixel Size: 0.249 × 0.249 mm
■Pixel Pitch:0.274 × 0.274 mm
■Duty: 1/64 Duty
■Display Mode: Passive Matrix
■Display Color: OLED, White / Yellow / Green
■IC: SSD1309
■Interface: 6800,8080,4-wire SPI,I2C
■Size: 1.54 inch
REX012864Y - Raystar 

>> Link to REX012864Y


3. [RX320240D] COG LCD Module 320x240

RX320240D is a monochrome graphic LCD module made of 320x240 dot matrix format. This STN COG module is built in with RA8835 controller IC; it supports 6800 and 8080 parallel interface. This COG module RX320240D is having the same outline dimension and VA size as TAB module RT320240B3, but AA size is different. The RX320240D is an alternative item to replace RT320240B3 which TAB IC had been phased out. Comparing RX320240D (COG) to RT320240B3 (TAB), except the module structure is different; the outline dimension, VA size, interface, pin assignment, main electrical characteristics are the same, just AA size is a little different. If customers don’t need controller IC on your module, please choose RX320240G as option.

The supply voltage for logic of RX320240D is 3.0V to 3.6V, typical value 3.3V, 1/240 duty circle. This module can be operating at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃. RX320240D is available in FSTN positive LCD and with White LED backlight; please contact us if you need different LCD type and LED combination.

RX320240D - Raystar

General Specification:

■Module dimension: 94.7 x 83.3 x 8.6(max) mm
■View area: 81.4 x 61.0 mm
■Active area: 76.785 x 57.11 mm
■Number of dots: 320 x 240
■Dot size: 0.223 x 0.225 mm
■Dot pitch: 0.238 x 0.24 mm
■LCD type: FSTN Positive Transflective
■Duty: 1/240
■View direction: 6 o’clock
■Backlight Type: LED, White
■IC: RA8835
RX320240D - Raystar 

>> Link to RX320240D


Friendly Printing


 

TEL : 886-4-2565-0761 FAX : 886-4-2565-0760 E-mail : sales@raystar-optronics.com
Copyright © Raystar Optronics, Inc. All Rights Reserved.