16x2 OLED Character Display - REC001602D

16x2 OLED Character Display

Model No. REC001602D

REC001602D is a 16 Characters x 2 Line COB OLED display module. The size of the active area is 2.29” diagonal with module dimension 85.0x30.0 mm. This 2.29 inches character OLED display 16x2 has built-in IC RS0010, and boasts high contrast ratio 10,000 : 1. There are many interface options to choose from, including 6800, 8080, SPI interface. Logic supply voltage ranges from 4.8V-5.3V, the typical value is 5V. The available emitting colors are white, yellow, green, blue and red.

Lower Power Consumption OLED module Feature:
• Extra Thin • Support Wide Operation Temp.(Operation temp.: -40°C ~ +80°C)
• Unlimited Viewing Angle (175H,175V) • Lower Power Consumption • High Brightness
• High Contrast Ratio • Faster Response Time (at +25°C: 10μ Sec.) • No need of backlight

Data source ref: REC001602DYPP5N00100

Inquiry or Demo Code Datasheet Back Previous Next

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
Structure	COB
Size (Diagonal)	2.29	inch
Characters × Lines	16 Characters × 2 Lines
Module Dimension	85.0 × 30.0 × 10.0 (MAX)	mm
Viewing Area	66.0 × 16.0	mm
Active Area	56.95 × 11.85	mm
Dot / Pixel Size	0.55 × 0.65	mm
Dot / Pixel Pitch	0.60 × 0.70	mm
Character Size	2.95 × 5.55	mm
Character Pitch	3.6 × 6.3	mm
Emitting Color	OLED, White / Yellow / Green / Blue / Red
IC	RS0010-TX
Interface	6800, option 8080
Power Supply	5V
Duty	1/16 duty cycle
Polarizer Type	Polarizer optional
Type	OLED Character Display

Pin No.	Symbol	Level	Description
1	VDD	5.0V	Supply Voltage for logic
2	VSS	0V	Ground
3	NC	－	No Connection
4	RS	H/L	H: DATA, L: Instruction code
5	R/W	H/L	H: Read(Module→MPU) L: Write(MPU→Module)
6	E	H,H→L	Chip enable signal
7	DB0	H/L	Data bit 0
8	DB1	H/L	Data bit 1
9	DB2	H/L	Data bit 2
10	DB3	H/L	Data bit 3
11	DB4	H/L	Data bit 4
12	DB5	H/L	Data bit 5
13	DB6	H/L	Data bit 6
14	DB7	H/L	Data bit 7

16x2 OLED Character Display - REC001602D

Item	Symbol	Min	Max	Unit
Operating Temperature	TOP	-40	+80	°C
Storage Temperature	TST	-40	+85	°C
Supply Voltage For Logic	VDD-VSS	-0.3	5.3	V

DC Electrical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For Logic	VDD-VSS	－	4.8	5.0	5.3	V
Input High Volt.	VIH	－	0.8xVDD	－	VDD	V
Input Low Volt.	VIL	－	GND	－	0.2xVDD	V
Output High Volt.	VOH	IOH=-0.5mA	0.8xVDD	－	VDD	V
Output Low Volt.	VOL	IOL=0.5mA	GND	－	0.2xVDD	V
50% Check Board Operating Current	IDD	VDD=5.0V	－	35.0	52.5	mA