Character OLED Display 16x1 - REC001601B

Character OLED Display 16x1

Model No. REC001601B

REC001601B is a 16 Characters x 1 Line COB OLED display module. The size of the active area is 2.25” diagonal with module dimension 80.0x36.0 mm. This 2.25 inches character OLED display 16x1 has built-in IC RS0010-TX, and boasts high contrast ratio 10,000 : 1. There are many interface options to choose from, including 6800, 8080, SPI interface. Logic supply voltage ranges from 4.8V-5.3V, the typical value is 5V. The available emitting colors are white, yellow, green, sky blue and red.

Data source ref: REC001601BWPP5N00100

Inquiry or Demo Code Datasheet Back Previous Next

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
Structure	COB
Size (Diagonal)	2.25	inch
Characters × Lines	16 Characters × 1 Line
Module Dimension	80.0 × 36.0 × 10.0 (max.)	mm
Viewing Area	66.0 × 16.0	mm
Active Area	56.95 × 5.55	mm
Dot / Pixel Size	0.55 × 0.65	mm
Dot / Pixel Pitch	0.60 × 0.70	mm
Character Size	2.95 × 5.55	mm
Character Pitch	3.60 × 5.55	mm
Emitting Color	OLED, White / Yellow / Green / Sky Blue / Red
IC	RS0010-TX
Interface	Default 6800, options 8080 and SPI
Power Supply	5V
Duty	1/8
Storage Temperature	-40~+85	°C
Polarizer Type	Polarizer optional
Type	OLED Character Display

Pin No.	Symbol	Level	Description
1	VSS	0V	Ground
2	VDD	5.0V	Supply Voltage for logic
3	NC	－
4	RS	H/L	H: DATA, L: Instruction code
5	R/W	H/L	H: Read(Module→MPU) L: Write(MPU→Module)
6	E	H,H→L	Chip enable signal
7	DB0	H/L	Data bit 0
8	DB1	H/L	Data bit 1
9	DB2	H/L	Data bit 2
10	DB3	H/L	Data bit 3
11	DB4	H/L	Data bit 4
12	DB5	H/L	Data bit 5
13	DB6	H/L	Data bit 6
14	DB7	H/L	Data bit 7
15	NC	－
16	NC	－

Character OLED Display 16x1 - REC001601B

Item	Symbol	Min	Max	Unit
Operating Temperature	TOP	-40	+80	°C
Storage Temperature	TST	-40	+85	°C
Supply Voltage For Logic	VDD-VSS	-0.3	5.3	V

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For Logic	VDD-VSS	－	4.8	5.0	5.3	V
Input High Volt.	VIH	－	0.8xVDD	－	VDD	V
Input Low Volt.	VIL	－	GND	－	0.2xVDD	V
Output High Volt.	VOH	IOH=-0.5mA	0.8xVDD	－	VDD	V
Output Low Volt.	VOL	IOL=0.5mA	GND	－	0.2xVDD	V
50% Check Board Operating Current	IDD	VDD=5V	－	30	60	mA