100x32 OLED Graphic Display Module 2.44 - REG010032A

100x32 OLED Graphic Display Module 2.44"

Model No. REG010032A

REG010032A is a dot matrix 100x32 COB graphic type OLED dispilay module. The size of the active area is 2.44” diagonal with module dimension 98.0x60.0 mm. This 100x32 OLED display module has built-in IC RS0010-TX, and boasts high contrast ratio 10,000 : 1. There are many interface options to choose from, including 6800, 8080, SPI interface. Logic supply voltage ranges from 4.8V-5.3V, the typical value is 5V. The available emitting colors are white, yellow, green and blue.

Data source ref: REG010032AYPP5N00100

Inquiry or Demo Code Datasheet Back Previous Next

General Specs
Interface Pin Function
Contour Drawing
Absolute Maximum Ratings
Electrical Characteristics

Item	Dimension	Unit
Structure	COB
Size (Diagonal)	2.44	inch
Dot Matrix / Resolution	100 × 32	dots
Module Dimension	98.0 × 60.0 × 10.0 (MAX)	mm
Viewing Area	77.0 × 25.20	mm
Active Area	58.95 × 19.15	mm
Dot / Pixel Size	0.54 × 0.55	mm
Dot / Pixel Pitch	0.59 × 0.60	mm
Emitting Color	OLED, White / Yellow / Green / Blue
IC	RS0010-TX
Interface	6800, option 8080, SPI
Power Supply	5V
Duty	1/16 duty cycle
Operating Temperature	-40~+80	°C
Storage Temperature	-40~+85	°C
Polarizer Type	Polarizer optional
Type	OLED Graphic Display

Pin No.	Symbol	Level	Description
1	VSS	0V	Ground
2	VDD	5.0V	Supply Voltage for logic
3	NC	－	No Connection
4	RS	H/L	H: DATA, L: Instruction code
5	R/W	H/L	H: Read(Module→MPU) L: Write(MPU→Module)
6	E	H,H→L	Chip enable signal
7	DB0	H/L	Data bit 0
8	DB1	H/L	Data bit 1
9	DB2	H/L	Data bit 2
10	DB3	H/L	Data bit 3
11	DB4	H/L	Data bit 4
12	DB5	H/L	Data bit 5
13	DB6	H/L	Data bit 6
14	DB7	H/L	Data bit 7
15	CS1	－	Chip1 select input pin
16	CS2	－	Chip2 select input pin

100x32 OLED Graphic Display Module 2.44 - REG010032A

Item	Symbol	Min	Max	Unit
Operating Temperature	TOP	-40	+80	°C
Storage Temperature	TST	-40	+85	°C
Supply Voltage For Logic	VDD-VSS	-0.3	5.3	V

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage For Logic	VDD-VSS	－	4.8	5.0	5.3	V
Input High Volt.	VIH	－	0.8xVDD	－	VDD	V
Input Low Volt.	VIL	－	GND	－	0.2xVDD	V
Output High Volt.	VOH	IOH=-0.5mA	0.8xVDD	－	VDD	V
Output Low Volt.	VOL	IOL=0.5mA	GND	－	0.2xVDD	V
50% Check Board Operating Current	IDD	VDD=5V	－	60	90	mA