I2C 128x64 Graphic OLED Display 0.96 - REA012864D-01
I2C 128x64 Graphic OLED Display 0.96 - REA012864D-01
I2C 128x64 Graphic OLED Display 0.96 - REA012864D-01
I2C 128x64 Graphic OLED Display 0.96 - REA012864D-01
I2C 128x64 Graphic OLED Display 0.96 - REA012864D-01

I2C 128x64 Graphic OLED Display 0.96"

Model No. REA012864D-01

REA012864D-01 is a dot matrix 128x64 COG graphic type OLED module. The size of the active area is 0.96” diagonal with module dimension 38×28.5 mm. This 0.96 inches OLED module has built-in IC SSD1306, and boasts high contrast ratio 10,000 : 1. REA012864D-01 OLED dispaly has options of interface for customers to choose from, including I2C (default), SPI. Logic supply voltage ranges from 2.8V-3.2V, the typical value is 3V. The available emitting colors are white, yellow and blue.

Data source ref: REA012864DWPP3N00001

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Structure COG + PCB
Size (Diagonal) 0.96 inch
Dot Matrix / Resolution 128 × 64 dots
Module Dimension 38.0 × 28.5 × 2.37 mm
View Area 23.94 × 12.06 mm
Active Area 21.74 × 10.86 mm
Dot / Pixel Size 0.148 × 0.148 mm
Dot / Pixel Pitch 0.17 × 0.17 mm
Emitting Color OLED, White / Yellow / Blue
Display Mode Passive Matrix
IC SSD1306
Interface I2C,Optional SPI
Power Supply 3V
Duty 1/64 duty
Operating Temperature -40~+80 °C
Storage Temperature -40~+85 °C
Type OLED Graphic Display
No. Symbol Function
1 MOSI When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
2 SCLK
3 DC In I2C mode, this pin acts as SA0 for slave address selection.
When 3-wire serial interface is selected, this pin must be connected to VSS.
4 RST This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
5 CS This pin is the chip select input. (active LOW).
6 VDD 3.0V Power supply pin for core logic operation.
7 VIN 5.0V Power supply pin for core logic operation.
8 GND This is a ground pin.

I2C 128x64 Graphic OLED Display 0.96 - REA012864D-01

Parameter Symbol Min Max Unit
Supply Voltage for Logic VDD 1.65 3.3 V
Supply Voltage for Logic VIN 4.0 6.0 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C
Item Symbol Condition Min Typ Max Unit
Supply Voltage for Logic (3V) VDD 2.8 3.0 3.2 V
Supply Voltage for Logic (5V) VIN 4.8 5.0 5.2 V
Input High Volt. VIH 0.8×VDD VDDIO V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.9×VDD VDDIO V
Output Low Volt. VOL 0 0.1×VDD V
50% Check Board operating Current ICC Vcc=7.5V 12.0 20.0 mA
Top