1.92 inch 160x128 COG OLED Display Module with PCB - REA160128A
1.92 inch 160x128 COG OLED Display Module with PCB - REA160128A
1.92 inch 160x128 COG OLED Display Module with PCB - REA160128A
1.92 inch 160x128 COG OLED Display Module with PCB - REA160128A
1.92 inch 160x128 COG OLED Display Module with PCB - REA160128A
1.92 inch 160x128 COG OLED Display Module with PCB - REA160128A

1.92 inch 160x128 COG OLED Display Module with PCB

Model No. REA160128A

REA160128A is a dot matrix 160x128 COG graphic type OLED module with PCB. The size of the active area is 1.92” diagonal with module dimension 34.9×57.8 mm. This 1.92-inch OLED module has built-in IC SH1108, boasts high contrast ratio 10,000 : 1, and supports 4-line SPI serial Interface.

Logic supply voltage ranges from 1.65V-3.3V, the typical value is 3V. The available emitting colors are white and yellow. The module can operate within the range of -40°C to +80°C; storage temperature ranges from -40°C to +85°C. Feel free to send us inquiry if you’d like to know more information.

Data source ref: REA160128AWPP3N00000

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
  • Video
Item Dimension Unit
Structure COG + PCB
Size (Diagonal) 1.92 inch
Dot Matrix / Resolution 160 × 128 dots
Module Dimension 34.90 × 57.80 × 5.36 mm
View Area 30.91 × 41.34 mm
Active Area 28.908 × 39.34 mm
Dot / Pixel Size 0.206 × 0.226 mm
Dot / Pixel Pitch 0.226 × 0.246 mm
Emitting Color OLED, White / Yellow
Support Grayscale No
Display Mode Passive Matrix
IC SH1108
Interface 4-line SPI
Power Supply 3V
Duty 1/128 duty
Operating Temperature -40~+80 °C
Storage Temperature -40~+85 °C
Polarizer Type Polarizer optional
Type OLED Graphic Display
No. Symbol Function
1 GND Ground.
2 VCC Power supply pin for logic.
3 D0 When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI).
4 D1
5 RES# This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level.
6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
D/C = “H”: the inputs at D0 and D1 are treated as display data.
D/C = “L”: the inputs at D0 and D1 are transferred to the command registers.
7 CS# This pad is the chip select input. When CS = “L”, then the chip select becomes active, and data command I/O is enabled.

1.92 inch 160x128 COG OLED Display Module with PCB - REA160128A

Parameter Symbol Min Max Unit
Supply Voltage for Logic VCC -0.3 3.6 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C

DC Electrical Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage for Logic VCC 1.65 3.0 3.3 V
High Level Input VIH 0.8×VCC VCC V
Low Level Input VIL GND 0.2×VCC V
High Level Output VOH 0.8×VCC VCC V
Low Level Output VOL GND 0.2×VCC V
50% Check Board operating Current ICC VCC =3V 100 200 mA

1.92" 160x128 COG OLED - Video

Top