96x32 OLED, OLED 96x32 0.68 OLED,  With ZIF FPC / HOTBAR FPC, REX009632B
96x32 OLED, OLED 96x32 0.68 OLED,  With ZIF FPC / HOTBAR FPC, REX009632B
96x32 OLED, OLED 96x32 0.68 OLED,  With ZIF FPC / HOTBAR FPC, REX009632B
96x32 OLED, OLED 96x32 0.68 OLED,  With ZIF FPC / HOTBAR FPC, REX009632B
96x32 OLED, OLED 96x32 0.68 OLED,  With ZIF FPC / HOTBAR FPC, REX009632B
96x32 OLED, OLED 96x32 0.68 OLED,  With ZIF FPC / HOTBAR FPC, REX009632B
96x32 OLED, OLED 96x32 0.68 OLED,  With ZIF FPC / HOTBAR FPC, REX009632B
96x32 OLED, OLED 96x32 0.68 OLED,  With ZIF FPC / HOTBAR FPC, REX009632B

0.68 inch 96x32 Graphic OLED Display Module

Model No. REX009632B

REX009632B is a dot matrix 96x32 graphic type OLED module. The size is small—only 0.68” diagonal with module dimension 19.8x12.32mm. This 96x32 OLED module has built-in IC SSD1305, and boasts high contrast ratio 10,000 : 1. There are many interface options to choose from, including 8-bits 6800/8080 parallel interface, 4-line SPI, and I2C serial interface. Logic supply voltage ranges from 2.8V-3.3V, the typical value is 3V. This series offers different types of FPC such as ZIF and Hotbar FPC. The available emitting colors are white and yellow.

★ Other FPC options available

Data source ref: REX009632BWAP3N00000

Inquiry or Demo Code Datasheet Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
  • Options
Item Dimension Unit
Structure COG
Size (Diagonal) 0.68 inch
Dot Matrix / Resolution 96 × 32 dots
Module Dimension 19.80 × 12.32 × 1.21 mm
View Area 17.298 × 6.418 mm
Active Area 16.298 × 5.418 mm
Dot / Pixel Size 0.148 × 0.148 mm
Dot / Pixel Pitch 0.17 × 0.17 mm
Emitting Color OLED, White / Yellow
Display Mode Passive Matrix
IC SSD1305
Interface 8-bits 6800, 8-bits 8080, 4-line SPI, I2C
Power Supply 3V
Duty 1/32 Duty
Operating Temperature -40~+80 °C
Storage Temperature -40~+85 °C
FPC Options Yes
Type OLED Graphic Display
Pin Symbol I/O Function
1 VSS - Reserved Pin(Supporting Pin)
The supporting pins can reduce the influences from stresses on the function pins. These pins must be connected to external ground.
2 GDR - Reserved pin, not connected.
3 VDDB P Reserved pin, not connected.
4 FB - Reserved pin, not connected.
5 NC - Not connected.
6 VBREF - Reserved pin, not connected.
7 NC - Not connected.
8 NC - Not connected.
9 VDD P Power supply pin for core logic operation.
10 BS1 I MCU bus interface selection pins. Select appropriate logic setting as described in the following table. BS2, and BS1 are pin select.
  4-line SPI I2C 8-bits 8080 8-bits 6800
BS1 0 1 1 0
BS2 0 0 1 1
11 BS2 I
12 NC - Not connected.
13 CS# I This pin is the chip select input connecting to the MCU.
The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
14 RES# I This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation.
15 D/C# I This pin is Data/Command control pin connecting to the MCU.
When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
In I2C mode, this pin acts as SA0 for slave address selection.
16 WR# I This is read / write control input pin connecting to the MCU interface.
When interfacing to a 6800-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH (i.e. connect to VDD) and write mode when LOW.
When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.
17 E/RD# I This pin is MCU interface input.
When 6800 interface mode is selected, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled HIGH and the chip is selected.
When 8080 interface mode is selected, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected.
When serial or I2C interface is selected, this pin must be connected to VSS.
18~25 D0~D7 - These are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus. When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
26 IREF - This is segment output current reference pin.
When external IREF is used, a resistor should be connected between this pin and VSS to maintain the IREF current at 30uA.
27 VCOMH - COM signal deselected voltage level.
A capacitor should be connected between this pin and VSS.
28 VCC - Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
When charge pump is enabled, a capacitor should be connected between this pin and VSS.

REX009632B with ZIF FPC

OLED 96x32, 0.68 inch 96x32 OLED Display with ZIF FPC - REX009632B with ZIF FPC - Raystar

 

REX009632B with Hotbar FPC

OLED 96x32, 0.68 inch 96x32 OLED Display with ZIF FPC - REX009632B with Hotbar FPC - Raystar

Parameter Symbol Min Max Unit
Supply Voltage for Logic VDD -0.3 4 V
Supply Voltage for Display VCC 0 16 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C

DC Characteristics

Item Symbol Condition Min Typ Max Unit
Supply Voltage for Logic VDD 2.8 3.0 3.3 V
Supply Voltage for Display VCC 11.5 12 12.5 V
High Level Input VIH 0.8×VDD VDD V
Low Level Input VIL 0 0.2×VDD V
High Level Output VOH Iout = 100uA 0.9×VDD VDD V
Low Level Output VOL Iout = 100uA 0 0.1×VDD V

 

Symbol Parameter Min. Typ. Max. Unit Condition
ICC VCC Supply Current - 5.0 7.5 mA VDD =3.0V , Display 100% ON

FPC options

Drawing FPC Length PIN pitch ZIF / HOTBAR FPC Interface FPC No. Create Date
 FPC2050002811XXXXX01 30 28 0.5 ZIF FPC 6800, 8080,4-Wire SPI, I2C FPC2050002811XXXXX01 20180131
 FPC2065002501XXXXX00 8.479 25 0.65 HOTBAR FPC 6800, 8080,4-Wire SPI, I2C FPC2065002501XXXXX00 20190906
Top