SSD1327 OLED, 1.1 inch OLED 96x64, REA009664B - Raystar
SSD1327 OLED, 1.1 inch OLED 96x64, REA009664B - Raystar
SSD1327 OLED, 1.1 inch OLED 96x64, REA009664B - Raystar
SSD1327 OLED, 1.1 inch OLED 96x64, REA009664B - Raystar
SSD1327 OLED, 1.1 inch OLED 96x64, REA009664B - Raystar

1.1 inch SSD1327 OLED 96x64

Model No. REA009664B

REA009664B is a dot matrix 96x64 COG graphic type OLED module with PCB. The size of the active area is 1.1” diagonal with module dimension 31.5x31.5 mm. This 1.1 inches OLED module has built-in IC SSD1327, and boasts high contrast ratio 10,000 : 1. There are supporting SPI / I2C serial Interface.

The REA009664B SSD1327 OLED display logic supply voltage ranges from 2.8V-3.2V, the typical value is 3V. The available emitting colors are white, yellow and support grayscale. Feel free to send us inquiry if you’d like to know more information.

★Support Grayscale

Data source ref: REA009664BYAP3N00000

Inquiry or Demo Code Datasheet Back Previous Next
  • General Specs
  • Interface Pin Function
  • Contour Drawing
  • Absolute Maximum Ratings
  • Electrical Characteristics
Item Dimension Unit
Structure COG + PCB
Size (Diagonal) 1.1 inch
Dot Matrix / Resolution 96 × 64 dots
Module Dimension 31.5 × 31.5 × 2.72 mm
View Area 24.54 × 17.02 mm
Active Area 22.53 × 15.01 mm
Dot / Pixel Size 0.205 × 0.205 mm
Dot / Pixel Pitch 0.235 × 0.235 mm
Emitting Color OLED, Yellow, White
Support Grayscale Yes
Display Mode Passive Matrix
IC SSD1327
Interface SPI ,Optional I2C
Power Supply 3V
Duty 1/64 Duty
Operating Temperature -40~+80 °C
Storage Temperature -40~+85 °C
Polarizer Type Polarizer optional
Type OLED Graphic Display
No. Symbol Function
1 SDA When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
2 SCL
3 SA0 In I2C mode, this pin acts as SA0 for slave address selection.
When 3-wire serial interface is selected, this pin must be connected to VSS.
4 RST This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed.
Keep this pin HIGH (i.e. connect to VDD) during normal operation.
5 CS This pin is the chip select input. (active LOW).
6 VDD 3.0V Power supply pin for core logic operation.
7 VIN 5.0V Power supply pin for core logic operation.
8 GND This is a ground pin.

SSD1327 OLED, 1.1 inch OLED 96x64 - REA009664B - Raystar

Parameter Symbol Min Max Unit
Supply Voltage for Logic VDD 1.65 3.30 V
Supply Voltage for Logic VIN 4.0 6.0 V
Supply Voltage for Display VCC 0 16.0 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C
Item Symbol Condition Min Typ Max Unit
Supply Voltage for Logic VDD 2.8 3.0 3.2 V
Supply Voltage for Logic VIN 4.8 5.0 5.2 V
Supply Voltage for Display VCC 7.5 8.0 8.5 V
Input High Volt. VIH 0.8×VDD VDDIO V
Input Low Volt. VIL 0 0.2×VDD V
Output High Volt. VOH 0.9×VDD VDDIO V
Output Low Volt. VOL 0 0.1×VDD V
50% Check Board operating Current IDD VDD=3.0V 55 100 mA
Top